Table of Contents
Advertisement
!
C a u t i o n
To unblock the PIN:
Press * * 0 5 e.
1
2
Enter the PUK code.
Press e.
3
Enter a new 4- to 8-digit SIM PIN and press e.
4
Re-enter your SIM PIN and press e.
5
If you entered the codes properly, the SIM Unlocked screen displays.
Disabling/Enabling the PIN Requirement
When the PIN requirement is enabled, you are
prompted to enter your PIN each time you turn
on your phone. Until a valid PIN is entered, you
can use the phone only to make emergency calls.
After the PIN is accepted, the phone registers on
the network and the Ready screen displays.
When the PIN requirement is disabled, the phone
can be used without entering a PIN.
18
If you unsuccessfully enter the PUK code
ten times, the SIM card is permanently
blocked and must be replaced. If this
happens, all data will be lost. You will get a
message to contact your service provider. If
the SIM card is blocked, the i80s phone only
allows outgoing Emergency calls.
www.motorola.com/iden
P
Advertisement
Table of Contents
