Do you have a question about the SC-VGA-2 and is the answer not in the manual?
Questions and answers
Summary of Contents for Hall Research Technologies SC-VGA-2
Page 1
Changes the resolution and refresh rate of your video signal ! March 2004 Order toll-free in the U.S. 800-959-6439 CUSTOMER FREE technical support, Call 714-641-6607 or fax 714-641-6698 SUPPORT Mail order: Hall Research Technologies, 3613 W.MacArthur Blvd. #612, Santa Ana, CA 92704 INFORMATION Web site: www.hallresearch.com • E-mail: info@ hallresearch.com...
Page 3
VGA / HDTV Video Processor TRADEMARKS USED IN THIS MANUAL Hall Research, HRT, and (logo) are trademarks of Hall Research Technologies, Inc. IBM is a registered trademark of International Business Machines Corporation. Any other trademarks mentioned in this manual are acknowledged to be the property of the trademark owners.
3.1 Front and Rear Panels ............page 5 3.2 Menus and Adjustments ............page 5 4. Troubleshooting................. page 8 Contacting Hall Research Technologies ........page 8 Shipping & Packaging..............page 8 5. Specifications ................page 9 Hall Research Technologies, Inc.
The controls include input/output setup picture adjustment, H/V phase adjustment, System information and many other advance options. The SC-VGA-2 allows you to specify a resolution and refresh rate for it's output. Then it will output a steady (uninterrupted) VGA signal to your display device at your specified rate regardless of the input.
When one of the PC resolutions is selected as output, use the 15-pin D- Sub VGA cable to connect the PC/HDTV output of the SC-VGA-2 to the VGA input of a display monitor. When one of the HDTV resolutions is selected as output. use a 15-pin D-Sub to YPbPr/3 RCA adaptor cable to connect the PC/HDTV output of the SC-VGA-2 to the YPbPr input of a HDTV device.
VGA / HDTV Video Processor 2.3 Connection Block Diagram 3. Configuration & Operation 3.1 Front and Rear Panels 3.2 Menus and Adjustments Pressing the Menu button will bring up the OSD menu controls on the screen as follows:...
Page 8
Model SC-VGA-2 Ø Input set up Ø Output set up Ø Picture Adjust Ø HV Adjust Ø OSD Adjust Ø System Information Ø Auto Adjust Ø Exit Use +,or - to move the arrow cursor to your desired selection, then press MENU to confirm your selection and enter into sub menu.
Page 9
When it is selected, it shows the input/output resolution and their vertical refresh rate on the screen. When it is selected the SC-VGA-2 will automatically adjust all the parameter to the factory preset value. Select to exit from the current menu page.
If you need to transport or ship your Video Processor: • Package it carefully. We recommend that you use the original container. • Before you ship the units back to Hall Research Technologies for repair or return, contact us to get a Return Authorization (RMA) number.
Need help?
Do you have a question about the SC-VGA-2 and is the answer not in the manual?
Questions and answers