Table of Contents
Advertisement
Basic Operation
Call In Absence Indicator
If your phone is on and an incoming call is unanswered,
CALL is displayed for 16 seconds. The display and keypad
backlight will then extinguish to conserve the battery level.
Pressing any key but
or
redisplays CALL to
CLR
END
inform you of the call attempt. You must press
or
CLR
END
to cancel the message and clear the display.
NOTE Unless you have subscribed to Calling Line ID, the
phone will not display or retrieve the phone number of the
calling party.
Signal Strength Meter
The Signal Strength Meter (SSM) indicates the relative
strength of the signal received by your phone. The SSM is
displayed as shown below. The
alone represents the
lowest strength, with each additional
representing a
stronger signal.
Weak Signal
Strong Signal
The SSM appears every time you turn your phone on. After
the display blanks out (after about 16 seconds), the SSM
will "strobe" to indicate that the phone is on. To redisplay
the SSM press any key.
To best utilize the SSM, you should familiarize yourself
with the relative signal strength levels and their associated
call placement and call-in-progress qualities.
Any messages, such as Loc d , appearing in the display as
a result of activation of a feature will take priority over
SSM. You will not see the SSM displayed in these cases.
9
Advertisement
Table of Contents
