Summary of Contents for Seatool SVH-HERO3-300
- Page 1 GOPRO HERO4 HERO3+ HERO3 300 Meter Waterproof Housing Type IPSC Seatool SVH-HERO3-300 MANUAL Please read this manual before use. NTF CORPORATION UH Division http://www.seatool.net...
-
Page 2: Features Of This Product
※ Please check, and test the housing according to this manual prior to use. ※ Neither NTF Corporation, Seatool/Resea nor their agents shall warrant or bear any responsibility for any incident related to water leakage, damage or loss of data, unauthorized modification, disassembly and repair;... -
Page 3: Package Contents
・O-ring Grease GETTING TO KNOW YOUR HOUSING, NOMENCLATURE NOTE: The SEATOOL SVH-HERO3-300 UW Housing is designed for use with the GoPro HERO4 HERO3 + or HERO3 series action camera and GoPro LCD Touch BacPac or GoPro Battery BacPac with iBUFFALO BSMPA04 as internal battery power supply. -
Page 4: Warranty Information
※Dealer: Stamp your company name and contact information, purchase date, model and serial number. Recsea/Seatool Manufacturing & Sales NTF CORPORATION UH Division 390-1 Mii, Midori-Ku, Sagamihara-Shi Kanagawa 252-0151, Japan T: +81 (0)50-7541-0294 F: +81 (0)42-780-5720 http://www.seatool.net E-mail: info@seatool.net... - Page 5 OPENING AND CLOSING THE BACK COVER ※ Please do the following operations in a clean area with low humidity and dust. To OPEN, press Lock Lever while pulling Secure-Latch away from housing main body. To CLOSE, press Secure-Latch into place making sure the latch on the underside is properly placed in the Secure-Latch groove attached to the main housing body.
-
Page 6: Handling Precautions
※Two (2) screw holes are provided at the bottom of the housing for use in attaching Seatool/Recsea genuine tray and grip assemblies. CAUTION! Seatool or Recsea genuine options STRONGLY recommended. Leakage or damages due to the use of non-genuine options are NOT covered under warranty. - Page 7 2. Manipulate all buttons several times to flush out salt deposits and other contaminants. 3. Wipe any water off housing with a soft dry cloth. 4. Open Back Cover. 5. Using the O-ring Removal Pick, remove O-rings. 6. Clean O-ring grooves and contact surfaces using a clean cotton swab. DO NOT clean housing or Lens Port with volatile organic solvents or chemical cleaning agents such as thinner, gasoline, and benzine, etc.
-
Page 8: Specifications
※ Housing LCD window is manufactured using hard coat acrylic. When cleaning use a clean soft cloth taking care not to scratch it. OPTIONS The following items are optional. Please contact Seatool/Recsea or your local dealer if you wish to purchase. ・HERO4 Silver Spacer AD-H3-S ・WHG-HERO3 Fresh &... -
Page 9: Consumable Parts
※ Warranty does not cover any losses resulting from inoperability of this product, including those related to lost profits or any related expenses. ※ Seatool/Recsea will stock parts necessary for repair for five (5) years from stop of production. ※This product uses some degradable parts, such as buttons and O-rings. Seatool/Recsea recommends overhauling the housing once per year, more frequently if used often. - Page 10 MEMO...