Button And Button Descriptions; Program Selection - Beko DSFN-6837 Instruction Manual

Button and Button Descriptions

On / Off Button
When you press the On/Off button, the
display switches on with the last program
used and it dims when you turn the
machine off.
If the Half Load, function are enabled
during the last program used, these
functions will remain active when the
machine is turned off and on again. If
you would like to disable these functions
after turning the machine off and on
again, you must press the relevant
buttons.
Start / Pause / Cancel Button
It is used to start, pause or cancel the
selected program or the delayed start
countdown. The selected program will
start running when the Start / Pause
/ Cancel button is pressed. When the
button is pressed, lights up.
Wait for two seconds to view the full
display on the screen after you turn on
the machine by pressing the On/Off
button before you press Start / Pause /
Cancel button.
Program Selection Button
You can select the washing program you
want to use with the aid of the "Program
Data and Table of Average Consumption
Values" after pressing the program
selection button. Number of the selected
program appears in the program
indicator on the display in the format of
....... Program number will
increase by one each time you press the
program selection button. Number of the
defined programs can change depending
on the model you have purchased.
Half Load Button
If you want to run your machine without
loading it completely, place your dishes
into the machine as you desire. First,
press the On / Off Button . Select the
desired program and press the Half
Load button. You must see the Half
Load indicator
screen. Start the program by pressing
the Start / Pause / Cancel button.
Thanks to the Half Load option, you
can use both lower and upper baskets
of your machine and you can save
water and energy.
Delayed Start Button
You can delay the start of the selected
program until 9 hours with increments
of 1 hour by means of the Delayed
Start Function.

Program Selection

You can select the desired program
after turning on the machine by
pressing the On / Off button. Switch
to the program you want to operate
by pressing program selection button.
You can follow up the program you
are in from the program indicator
on the screen. Program number
will increase by one each time you
press the program selection button
(Number of the defined programs
can change depending on the model
you have purchased). The selected
washing program will start running
when the Start / Pause / Cancel
button is pressed
Time indicator will start displaying the
estimated remaining time to the end of
program.
28 EN
appearing on the
symbol light up.