Motorola BALI User Manual page 45

Turn Bluetooth power on/off
Set Bluetooth power to be on whenever your phone
is on.
C
Bluetooth
Find it: >
Turn On
Press (the right soft key).
Note: To extend battery life when you are not actively
using a Bluetooth connection, turn Bluetooth power off
by using this procedure and pressing
turn off Bluetooth power, your phone will not connect
to other Bluetooth devices until you turn on Bluetooth
power and then reconnect.
Place phone in discovery mode
Allow an unknown Bluetooth device to discover your
phone:
C
Bluetooth
Find it: >
Options
1 Press .
Discovery Mode
2 Scroll to
On
3 Scroll to and press
The following message appears:
one minute other devices can find you
If the device requests permission to bond with your
YES
phone, press and enter the device PIN code to
create a secure connection with the device. (The PIN
0000
code is typically set to
Turn Off
. If you
and press .
.
Discovery on: For
.
.)
Note: See the instructions that came with your device
for the device's PIN code and other information about
the device.
Pair with headset, handsfree device, or
computer
Note: Network/Service dependent.
Note: If you want to use your Motorola Bluetooth
headset with both an audio device and your phone,
use your phone's Bluetooth menus to connect the
phone with the headset. If you establish the
connection by pressing a button on the headset, or if
you allow the headset to connect automatically by
turning it on, you may experience unexpected results.
Before you try to connect to another Bluetooth device,
make sure your phone's Bluetooth power is
device is in pairing or bonding mode (see the user
guide for the device). You can connect your phone with
only one device at a time.
C
Bluetooth
Find it: >
Add New Device
1 Press to select
Note: If your Bluetooth power is not turned on, your
phone will prompt you to turn it on.
Place the device you are connecting
2 When you see
to in discoverable mode
On
and the
.
, press .
Bluetooth® connections 43