Table of Contents
Advertisement
☆ OPERATION：
AV IN:
Repeatedly pressing "AV switch" to select
camera signal and external AV signal. When
choosing camera signal, "AV switch" indicator light
would comes green continually, when choosing external AV
signal 1, "AV switch" indicator light would comes orange
continually, when choosing external AV signal 2, "AV switch"
indicator light would comes red continually. Note: If current
state is AV signal output, there is no VGA signal outputed.
TELE/WIDE:
Press the "TELE/WIDE" button to zoom
in/out the image.
AF/FAR/NEAR:
Press "AF" button for auto focus; press Tele or
WIDE button to adjust focus gradually and
constantly. Press this button for 3 seconds to enter into the
menu, where you can set up and operate the visualizer.
8
Advertisement
Table of Contents
