Advertisement
Advertisement
Table of Contents
Related Manuals for Raumfeld Sounddeck
Summary of Contents for Raumfeld Sounddeck
- Page 1 Quick Start Guide Raumfeld Sounddeck...
- Page 2 During the setup process, it is important to ensure that all Raumfeld devices receive a suffi cient Wi-Fi signal. A signal Begin the setup process with the Raumfeld Expand if you plan to use this device. that is too weak can lead to dropped connections.
-
Page 3: Speaker Placement
TV‘s HDMI ARC port. HDMI Place the device as desired and plug in the power cord. Note Alternately, you can connect the Sounddeck to your television via an optical cable (TOSLINK) or a stereo RCA cable. -
Page 4: Getting Started
During the initial setup, the remote control must be held in the immediate vicinity of the sounddeck. Press station buttons 1 and 4 simultaneously until the LED on the remote blinks three times. If the LED instead blinks 10 times in quick succession, you will need to carry out the procedure again. -
Page 5: Troubleshooting
The Raumfeld devices are connected to the network but playback is interrupted or skips. It is possible that one or more Raumfeld devices are receiving either too little or, at times, even no Wi-Fi signal. Try placing the device closer to the router, experiment with different placement locations or create a Outside the United States, please contact: wired connection between the affected device and router via Ethernet cable. - Page 6 Contact If you have any product related questions, need product support or have suggestions, please contact us at: Europe Email / support@raumfeld.com Email / us-support@raumfeld.com Telephone Telephone DE / CH / AT +49 (0) 30 300 930 400 + 1 888 98 31 276 (toll free)