Turning Off The Beep Sound; Selecting The Microphone Sensitivity - Sony ICD-70 Operating Instructions Manual

1
Press MENU to enter the
menu mode.
2
Turn the jog dial to display
"RecMode SP (or LP)" and
press the dial.
"SP (or LP)" will flash.
3
Turn the jog dial to select "SP"
or "LP" and press the dial.
Now the setting is completed.
4
Press MENU to exit the menu
mode.
Turning off the
Beep Sound
See illustrations on page 38 in the
Japanese instruction manual.
BEEP ON:
A beep will sound to indicate
that operation has been
accepted.
BEEP OFF:
No beep sound will be heard
except for the alarm and timer.
1
Press MENU to enter the
menu mode.
2
Turn the jog dial to display
"BEEP ON (or OFF)" and
press the jog dial.
"ON (or OFF)" will flash.
3
Turn the jog dial to select
"ON" or "OFF" and press the
jog dial.
The setting is completed.
4
Press MENU to exit the menu
mode.
What beep sound means
Beep patterns
- (single tone)
-- (double tone)
--- (triple tone)
---- ----
(continuous tone)
* This pattern lets you know the
procedure is wrong or informs you
of some messages, such as:
– you are trying to record a message
when you have already recorded
up to the maximum recordable
time or the maximum number of
messages.
– the unit has stopped functioning
due to lack of battery power.
Selecting the
Microphone
Sensitivity
See illustrations on page 40 in the
Japanese instruction manual.
MIC SENS H:
High sensitivity. Enables you
to record with clearer sound.
Selecting this position is
recommended for usual
recording.
MIC SENS L:
Low sensitivity. Select this
mode to eliminate the noisy
sound in the background.
(Speak closely to the
microphone when recording.)
Meaning
Usual mode
Enter/exit
special mode
Notice*
Alarm or
timer set time
has come
Continued
17