Helpful User Tips - Sentinel FX100B User Manual

Helpful User Tips

Clearing a Jam
If paper is not inserted properly into the shredder, or if the sheet capacity is
exceeded, a jam may result. Move the switch to the REVERSE (<<) position,
and remove the excess paper from the top and pull it out. TO PREVENT ANY
INJURIES, DO NOT PLACE YOUR HANDS NEAR THE FEED OPENING. Once
the paper is cleared, normal shredding operation can resume. If the shredder
jams while in reverse, press the switch to the AUTO position and let shredder
run to clear the jammed paper. If jam does not clear, slide the switch back and
forth between the REV and AUTO until the jam is cleared. If the jam cannot
be cleared following this procedure, unplug the unit and carefully remove the
jammed paper manually.
Overheating
If your shredder overheats, the unit will automatically shut off and all functions
will cease in order to protect the motor. Turn off and unplug the shredder from
the outlet. Allow enough time for the motor to cool down. The shredder will not
resume normal function until the temperature of the motor cools down to a
safe temperature. Once cool, plug the shredder back into the outlet, turn the
unit back on and resume normal operation. Make sure to empty waste basket
to avoid overloading the basket and damaging the cutting mechanism.
Bin Full Function
Some shredders are equipped with a mechanical or optical Bin Full sensor.
When the basket becomes full, the shredder will cease operation. Empty basket
to resume operation.
Emptying Basket
Always turn the shredder off and unplug the power cord from the AC outlet
before cleaning it, moving it, or emptying the wastebasket. Always keep
wastebasket emptied so that the shredder's output is not impeded. Never let
the wastebasket get full. This will lead to shredded material being pulled back
up into the shredder and cause jams.
Staples and Paperclips
Our shredders are designed primarily to shred paper and credit cards. You
should remove small paper clips and staples whenever possible to prolong the
life of the unit. You should not shred commercial staples, large paper clips or
binder clips.