Using [Remote Ctrl] With A Direct Connection - Panasonic HC-V770 Basic Operating Instructions Manual

Using [Remote Ctrl] with a direct connection

Use NFC to set up a direct connection between this unit and the smartphone.
≥ Set the NFC function of the smartphone to on.
1
Start up the smartphone application "Image App".
2
Touch the smartphone on
≥ Touch the NFC touch area while the NFC mark is displayed on
the smartphone screen.
≥ If this is the first time the smartphone is connecting to this unit,
touch [YES] on the screen of this unit, and then touch the
smartphone on
≥ If the unit is not recognised even when touching the
smartphone, change positions and try again.
≥ The connection cannot be established while this unit is
recording.
≥ When the connection is complete, images of this unit is displayed on the smartphone screen.
≥ This unit is turned on even if it touches the smartphone on
turned off with a LCD monitor.
Setting up a direct connection between this unit and the smartphone
when [Direct Connection Password] is set to [OFF]
1
Press Wi-Fi button on this unit and touch [Wi-Fi Setup].
2
Touch [Direct Connection].
3
On the smartphone, select the SSID displayed on this unit from the Wi-Fi
setup menu.
4
Start up the smartphone application "Image App".
≥ If this is the first time the smartphone is connecting to this unit, a message will be displayed on
the screen of this unit. Touch [YES].
≥ When the connection is complete, images of this unit is displayed on the smartphone screen.
≥ Transmission speed may decrease, or may not be usable depending on the environment it is used in.
≥ For details on how to set up a connection with [Direct Connection Password] set to [ON], refer to
the Operating Instructions (PDF format).
28
SQT0658 (ENG)
of this unit.
of this unit again.
of this unit, where this unit is