Table of Contents
Advertisement
Quick Links
EJ777-3 Bariatric Transport Chair
Operation Manual
EJ777-3-INS-LAB-RevA15
© 2015 GF Health Products, Inc.
EJ777-3 Transport Chair user and attendant:
Read this manual before operating the Transport Chair.
Save this manual for future reference.
The most current version of this manual can be found online at
www.grahamfield.com.
Advertisement
Table of Contents
Summary of Contents for Everest & Jennings EJ777-3
- Page 1 Operation Manual EJ777-3-INS-LAB-RevA15 © 2015 GF Health Products, Inc. EJ777-3 Transport Chair user and attendant: Read this manual before operating the Transport Chair. Save this manual for future reference. The most current version of this manual can be found online at...
-
Page 2: Table Of Contents
WARNING: EJ777-3 Transport Chair user and attendant: Do not operate the transport chair without first reading and understanding this manual. If you do not understand the warnings, cautions, and instructions provided herein, contact your healthcare professional, GF authorized distributor, or technical representative before proceeding with the use of this product;... -
Page 3: Introduction
Read the entire manual carefully before operating your new EJ777-3 Transport Chair, keep it handy for future reference, and refer to it as often as necessary to help maintain good performance standards. -
Page 4: Statements Of Significance
NOTICE: Indicates a potential hazard or unsafe practice that, if not avoided, could result in product or property damage. Info: Provides application recommendations or other useful information to ensure that you get the most from your product. EJ777-3-INS-LAB-RevA15 • EJ777-3 Bariatric Transport Chair... -
Page 5: Important Safety Precautions
EJ777-3 TRANSPORT CHAIR LABELS Read all labels on your EJ777-3 Transport Chair before operating it. Do not remove any of the labels. WARNING: To avoid possible tilt hazard, do not leave user unattended. - Page 6 WARNING: GF Health Products, Inc. specifically disclaims responsibility for any personal injury or property damage which may occur during any use which does not comply with federal, state, or local laws or ordinances. EJ777-3-INS-LAB-RevA15 • EJ777-3 Bariatric Transport Chair...
-
Page 7: Operation
3 OPERATION COMPONENT IDENTIFICATION Please familiarize yourself with main components, identified in EJ777-3 Transport Chair illustration below. back upholstery push handle hand grip upper back post armpad positioning belt carrying strap lower grip, attendant wheel lock seat upholstery crossbrace (with serial... -
Page 8: Handling Tips
Use the carrying straps to lift the unoccupied Transport Chair. BALANCE Proper balance is the key to maintaining the stability of your EJ777-3 Transport Chair. Reaching, bending, and transferring to or from a Transport Chair will change your weight distribution and center of gravity. Have an attendant with you at all times, especially when reaching, bending, or transferring. -
Page 9: For Attendant: Tilting
5. Place one foot on the tipping lever and apply downward force until the Transport Chair is tilted back enough to overcome the obstacle. 6. Lower the front end slowly. 7. If you have removed anti-tippers, replace them now. EJ777-3-INS-LAB-RevA15 • EJ777-3 Bariatric Transport Chair... -
Page 10: Ramps And Inclines
Curbs and steps should only be negotiated with the assistance of an attendant. The following are suggestions only for curb negotiation. It is important for you to develop your own safe technique that is best suited to your abilities. EJ777-3-INS-LAB-RevA15 • EJ777-3 Bariatric Transport Chair... - Page 11 Transport Chair up and over the curb. DO NOT lower the front casters down until the Transport Chair is back far enough to clear the curb. 6. If you have removed anti-tippers, replace them now. EJ777-3-INS-LAB-RevA15 • EJ777-3 Bariatric Transport Chair...
- Page 12 9. Turn the Transport Chair around, place one foot on the tipping lever, and gradually lower the front casters to the ground. 10. If you have removed anti-tippers, replace them now. EJ777-3-INS-LAB-RevA15 • EJ777-3 Bariatric Transport Chair...
-
Page 13: Adjustments
4 ADJUSTMENTS The EJ777-3 Transport Chair offers several adjustments to make it easier and more comfortable to operate. Section 7, MAINTENANCE, offers preventive maintenance suggestions for keeping your Transport Chair in excellent condition; ensure that all components are in excellent condition before adjusting. The following are recommended methods;... -
Page 14: Arm
Info: Front of arm must be fully down and engaged in the arm receptacle or the release lever will not lock into place. WARNING: Ensure that arms are locked into place before occupying or operating Transport Chair. EJ777-3-INS-LAB-RevA15 • EJ777-3 Bariatric Transport Chair... -
Page 15: Footrest-Detachable, Swingaway
2 inches. WARNING: The footplates' lowest point should be no closer to the ground than inches, to permit proper clearance. WARNING: Ensure that footplates are securely clamped before occupying or operating Transport Chair. EJ777-3-INS-LAB-RevA15 • EJ777-3 Bariatric Transport Chair... -
Page 16: Attendant Wheel Locks
WARNING: Ensure that wheel locks lock in place appropriately before occupying or operating Transport Chair. If your wheel locks are not operating correctly, please see your GF authorized distributor for repair. EJ777-3-INS-LAB-RevA15 • EJ777-3 Bariatric Transport Chair... -
Page 17: Transporting The Ej777-3 Transport Chair
5 TRANSPORTING THE EJ777-3 TRANSPORT CHAIR PREPARING THE EJ777-3 FOR TRANSPORT WARNING: This Transport Chair does not offer seating or occupant restraint equivalent to the seat provided in a motor vehicle! To increase your safety while traveling in a motor vehicle, always transfer to the vehicle seat and use the restraint provided by the vehicle manufacturer. - Page 18 WARNING: Ensure that Transport Chair is unfolded as instructed and that upper back is locked into place, seat rails are locked into place on cradles, and footrests are locked in place before occupying or operating Transport Chair. EJ777-3-INS-LAB-RevA15 • EJ777-3 Bariatric Transport Chair...
-
Page 19: Maintenance
6 MAINTENANCE Protect your E&J EJ777-3 Transport Chair by having it serviced regularly. Proper care and maintenance are essential to keep your Transport Chair in safe working condition. Periodic inspection, adjustment, and replacement of worn parts will provide many years of superb performance. When you believe that a component or part of your Transport Chair is not functioning properly, contact your GF authorized distributor immediately, as a potentially hazardous condition could result. - Page 20 Transport Chair. Check tire wear Examine tires at least once a week for surface wear and cracks and replace them as needed. Always replace tires when they become loose on the rims or cracks appear. EJ777-3-INS-LAB-RevA15 • EJ777-3 Bariatric Transport Chair...
- Page 21 Ensure that screws do not extend into the padding. Confirm that the posts at base of arm fit correctly in the sockets, snug but not binding. EJ777-3-INS-LAB-RevA15 • EJ777-3 Bariatric Transport Chair...
- Page 22 Evaluate all threads, locking nuts and bearings. Check wheel bearings Have your GF authorized distributor check caster and rear wheel axle bearings at least every six months. EJ777-3-INS-LAB-RevA15 • EJ777-3 Bariatric Transport Chair...
-
Page 23: Troubleshooting
WARNING: Unauthorized modification or the use of non-Everest & Jennings replacement parts could change the structure of the Transport Chair, void the warranty, and create a hazardous condition, which could result in serious personal injury. EJ777-3-INS-LAB-RevA15 • EJ777-3 Bariatric Transport Chair... -
Page 24: Specifications
8 SPECIFICATIONS The Everest & Jennings EJ777-3 Transport Chair has the following parameters: Seat width 24 inches (61 cm) Seat depth 18 inches (45.7 cm) Seat to floor height inches (52.1 cm) Back height 18 inches (45.7 cm) Overall length inches (82.6 cm) not including footrests... -
Page 25: Limited Warranty
4) Accessories or parts not provided by GF; 5) Charges by anyone for adjustments, repairs, replacement parts, installation or other work performed upon or in connection with such products which are not expressly authorized in writing, in advance, by GF; EJ777-3-INS-LAB-RevA15 • EJ777-3 Bariatric Transport Chair... - Page 26 GF will assist you in filing the freight claim. 3) Claims for any short shipment must be made within three (3) days of the invoice date. GF Health Products, Inc. 2935 Northeast Parkway Atlanta, GA 30360 Tel 770-368-4700 Fax 770-368-2386 www.grahamfield.com EJ777-3-INS-LAB-RevA15 • EJ777-3 Bariatric Transport Chair...
-
Page 27: Index
Attendant wheel locks, adjust 16 Tires, check 20 Backposts, check 22 Tools, for maintenance, list 20 Balance 8 Transfer activities 9 Transporting the EJ777-3 Transport Chair 17 Casters, adjust 13 Troubleshooting 23 Caster stems, check 22 CAUTION statement, significance 4 Upholstery, check 21... - Page 28 Manufactured for: GF Health Products, Inc. 2935 Northeast Parkway Atlanta, Georgia 30360 U.S.A. telephone: 770-368-4700 fax: 770-368-2386 www.grahamfield.com Made in China...
Need help?
Do you have a question about the EJ777-3 and is the answer not in the manual?
Questions and answers