Connecting To A Wireless Network - celcus LED32167FHDCNTD Operating Instructions Manual

use the Media Browser screen to access and play
PC/HDD/Media Player or any other devices that are
connection for higher playback quality.
Network Settings section in the Settings menu.
your TV directly to the network wall outlet.

Connecting to a Wireless Network

IMPORTANT
to use wireless network features.
change your SSID settings via the modem's
software. The TV cannot connect to networks with
a hidden SSID.
For connecting to a wireless LAN network, you
should perform the following steps:
1. Connect to your broadband ISP connection by
connecting an ethernet cable to the ETHERNET
2. Ensure that Nero Media Home software is
3.
4.
Network Settings section in the Settings menu.
A Wireless-N router (IEEE 802.11a/b/g/n) with
wireless gaming.
between other devices like computers.
The frequency and channel differ depending on the area.
The transmission speed differs depending on the
distance and number of obstructions between the
and the products that you use. The transmission
may also be cut off or get disconnected depending
the transmission speed are the theoretical maximum
values for the wireless standards. They are not the
actual speeds of data transmission.
The location where the transmission is most effective
differs depending on the usage environment.
n type modems. It is highly recommended that you
should use IEEE 802.11n communication protocol in
order to avoid any possible problems while watching
videos.
with audio/video performance.
are any other modems around with the same SSID.
Your TV's Network Settings include Wired and Wireless
Connection options. However, if your TV does not have
a USB Wi-Fi dongle, you should use a Wired Connection.
If you try to connect Wireless Connection when your TV
does not have a USB Wi-Fi dongle, a warning screen
will appear and the TV will not get an IP address. Try
connecting the LAN cable after this and then the TV will
be able to get an IP address.
English - 13 -