Model No. 4030
OPERATING INSTRUCTIONS:
Spotlight:
1. Make certain the light is retracted all the way down to the minimum height.
2. Press firmly the Spotlight ON/OFF Button marked "POWER" located on the forward near the front
Spotlight lens.
3. To turn OFF the Spotlight, press firmly the Spotlight ON/OFF Button marked "POWER".
Worklight:
CAUTION: Make sure the Spotlight ON/OFF Button marked "POWER" is NOT directly aimed your
eyes. The Worklight includes high intensity 30 LED's when turned ON. DO NOT AIM OR ILLUMI-
NATE THE WORKLIGHT AT YOUR EYES OR OTHERS NEAR YOU WHEN IT IS IN "ON" POSITION.
1. Hold the LightBolt rubberized grip firmly with one hand. Make certain the Spotlight "POWER" Button
is not facing you when continue to the next step.
2. Hold down to the forward part of the LightBolt with other hand and pull apart by extending the light
all the way outward until it stops.
3. To turn OFF the Worklight, retract the light all the way down to the minimum height.
Magnetic Base:
NOTE: The LightBolt bi-directional and may be operated in any directions. The housing base is
deigned with magnetic disc (The earlier design was equipped with multiple magnetic discs) that
can be mounted to any flat ferrous material.
1. Mount the base to any flat ferrous material (Carbon steel base).
2. Turn ON the Spotlight or extend the unit to illuminate the Worklight.
3. Reposition the light either in right side up, upside down or right angle to the mounting surface.
SPECIFICATIONS:
30 Super Bright LED Worklight.
3.6V - 1000mAh Rechargeable Internal battery.
6 Powerful and Bright LED Spotlight.
4 hours Continuous Operation Worklight in one full charge.
15 hours Continuous Operation Spotlight in one full charge.
Impact and shock resistance Rubberized housing.
Anti-slip Rubber Grips.
Includes AC and DC Chargers.
RoHS and CE Compliant.
Product Dimensions Retracted: 10" H x 3" W
Product Dimensions Extended : 15" H x 3" W
Unit Weight: 1 lb. - 0 Oz
NOTE: Specifications are subject to change without notice.
Need help?
Do you have a question about the LightBolt and is the answer not in the manual?