Bluetooth Boombox ® with AM/FM Radio Model: ITSB-353 Instruction Manual Please read this instruction manual carefully before use and keep for future reference.
CONTENTS Safety Instructions..................................1 Buttons and Controls..................................3 Features .......................................4 Battery Charging..................................4 Playing Audio via Bluetooth................................5 Playing Audio via AM/FM Radio..............................5 Important Information.................................5 Warranty....................................6 Product Specifications Bluetooth version Support A2DP and AVRCP pro le Bluetooth range Up to 10 meters (33 ft) Radio range FM: 87.5MHz–108MHz / AM: 530KHz-1710KHz Speakers:...
SAFETY INSTRUCTIONS Before using the unit, be sure to read all operating instructions carefully, please note that these are general precautions and may not pertain to your unit. For example, this unit may not have the capability to be connected to an outdoor antenna. 1.
Page 4
19. Outdoor antenna grounding - If an outside antenna is connected to the product, be sure the antenna system is grounded so as to provide some protection against voltage surges and built up static charges, section 810 of the National Electrical Code, ANSI/NFPA 70, provides information with respect to proper grounding of the mast and supporting structure, grounding of lead-in wire to an antenna discharge product, size of grounding conductors, location of...
BUTTONS AND CONTROLS FRONT BACK 1. Antenna 8. Volume Dial +/- 2. Handle 9. Mode Switch (OFF / Bluetooth / FM / AM) 3. AM/FM Radio Tuning Dial 10. Bluetooth LED Indicator 4. Play/Pause ( 11. Charging LED Indicator 5. Previous ( 12.
FEATURES Features: - Portable Bluetooth Boombox with Convenient Carry Handle - Wirelessly Stream Music from your Smartphone, Tablet or any other Bluetooth-enabled Device - AM/FM Radio - Built-in 2200mAh Rechargeable Battery for a Truly Wireless Listening Experience - Headphone Jack - Storage Compartment for Charging Cable BATTERY CHARGING 1.
1. Select the Bluetooth function on the Mode Switch. The Bluetooth LED indicator will begin ashing green. 2. Activate the Bluetooth function on your external device. 3. Select “ITSB-353” on your device to begin pairing. You will hear an audible beep, signifying your device is paired and the Bluetooth LED indicator will remain a constant green.
• Shipping fees are non-refundable to be payable to Innovative Technology Electronics Corp. (for handling and return shipping charges) (IT) will not be responsible for delays or unprocessed claims resulting from a purchaser’s failure to provide any / all of the necessary information.
Need help?
Do you have a question about the ITSB-353 and is the answer not in the manual?
Questions and answers