Table of Contents
Advertisement
Installing and uninstalling the UV lamp
Installing the UV lamp
A.
Caution
Avoid eye and skin contact with the UV lamp
since it can lead to temporary and permanent
blindness. Do not look into the UV lamp directly;
this can lead to eye damage.
Do not touch the glass of the UV lamp; the
fingerprint reduces the efficiency of the lamp (use
gloves).
Do not start the device without filters or with
damaged filters so as to avoid emission of
ultraviolet light from the UV lamp, which can lead
to blindness.
B.
Replacing the UV lamp
The service life of the UV lamp is 8,000 hours.
This can be reached if the lamp is used for about
1 year, for 24 hours per day. Please replace the
UV lamp within this time to ensure the cleaning
capacity.
C.
Installing the UV lamp
Hold the white ceramic pins at both ends of the
UV lamp(1), place the copper pin of the lamp in
the sleeve and turn it by 90° (2).
D.
Installing the filter
Re-install the nano photocatalyst filter, the
modified activated carbon filter, the highly-
efficient
HEPA
filter
This is how you remove the UV lamp
Turn off the device, remove the panel, the highly-
efficient HEPA filter, the modified activated carbon
filter and the nano photocatalyst filter one after
the other. After the UV lamp has cooled down for
15 minutes, hold the white ceramic pins at both
the ends of the UV lamp and turn them by 90°
(3). Remove the UV lamp (4).
and
the
front
panel.
Advertisement
Table of Contents
