Contents 1 Important safety instructions Hearing Safety General information 2 Onkyo Bluetooth wireless headset Box content Other devices Overview of your Bluetooth wireless headset 3 Charge and pair your headset Charge the battery Pair your headset Multiple pairing 4 Use your headset...
1 Important General information safety To avoid damage or malfunction: instructions Caution • Do not expose the headset to excessive heat. • Do not drop your headset. • Headset shall not be exposed to dripping or splashing. Hearing Safety • Do not allow your headset to be submerged in water.
Bluetooth and is compatible headset to the headset (see 'Technical data' on page Box content Overview of your Bluetooth wireless headset Onkyo Bluetooth wireless headset H500BT a LED indicator b Power on/off button c Microphone d Pairing/mute button e Audio jack...
3 Charge and 4 devices, the earliest paired device is replaced by the new one. pair your There are two ways to pair your headset with your mobile phone: headset Charge the battery Note • Before you use your headset for the first time, charge the battery for 5 hours for optimum battery capacity and lifetime.
• Manual pairing Activate the Bluetooth feature of your • NFC pairing mobile phone, select Onkyo H500BT. Enter the headset password "0000" (4 zeros) if prompted. For those mobile Manual pairing phones featuring Bluetooth 3.0 or Make sure that the headset is fully higher, no need to enter a password.
Page 8
Place your phone over the headset so that the NFC detection area of each device can touch each other. Pair the headset with the first device. Pair the headset with the second device. » The headset is now connected to two devices.
4 Use your » The white LED is on and fades out. Voice control headset • Siri/Google Now: press the pairing/ mute button once. Connect the headset to a Bluetooth device Turn on your mobile phone/Bluetooth device. Music control • Play or pause music: press once.
Page 10
Other headset indicator status Headset status Indicator The battery level is The white LED low. flashes slowly. The headset is ready The blue and for pairing. white LED flashes Call control alternately. • Pick up/hang up a call: tap once. The headset is paired The blue LED and connected.
Declaration of Conformity on www. • Make sure the headset is disconnected from the USB charging cable before removing the battery. onkyo-headphones.com If there is no collection/recycling system for Disposal of your old product electronic products in your country, you can...
Bluetooth SIG, Inc. and any use of such marks by Gibson Innovations Limited is under license. Onkyo® is a registered trade mark of Gibson Brands Inc. Other trademarks and trade names are those of their respective owners.
7 Frequently asked questions My Bluetooth headset does not switch on. The battery level is low. Charge the headset. I cannot pair my Bluetooth headset with a mobile phone. The Bluetooth is disabled. Enable the Bluetooth feature on your mobile phone and turn on the mobile phone before you turn on the headset.
Page 15
My headset does not work when the audio cable is connected. Microphone function will be deactivated if a 3.5mm audio cable is connected to the headset. In such case, your headset is only for music enjoyment. For further support, visit www.onkyo- headphones.com. ...
Page 16
This product has been manufactured by, and is sold under the responsibility of Gibson Innovations Ltd., and Gibson Innovations Ltd. is the warrantor in relation to this product. Onkyo® is a registered trade mark of Onkyo Corporation. Other trademarks and trade names are those of their respective owners.
Need help?
Do you have a question about the H500BT and is the answer not in the manual?
Questions and answers