Summary of Contents for Q Digital 1A-QP686
- Page 1 [Año] QDIGITAL Installation and Operation Manual High Speed Dome Camera Please read the operation manual carefully before installing and using this unit...
-
Page 2: Safety Precautions
SAFETY PRECAUTIONS CAUTION RISK OF ELECTRIC SHOCK. DO NOT OPEN! CAUTION: TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO DOT OPEN COVERS. NO USER SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL The lighting flash with a arrowhead symbol, in an equilateral triangle, is intended to alert the user. -
Page 3: Table Of Contents
INDEX 1. Important Safeguards ---------------------------------------------------------------- 2. Description of Functions ----------------------------------------------------------- 2.1 Integrated Multi-Protocol Decoder ---------------------------------------------------------------2 2.2 Integrated Speed-Variable PAN/TILT ------------------------------------------------------------2 2.3 High Intelligent Degree --------------------------------------------------------------------------2 2.4 Functions of the Camera ---------------------------------------------------------------------------2 3. Setup of the Menu of the Dome Camera ------------------------------------ 3.1 Basic Operation of the Menu-------------------------------------------------------------------------3 3.2 Setup of the Menu----------------------------------------------------------------------------------3 3.3 Appendix to the Menu----------------------------------------------------------------------------5... -
Page 4: Important Safeguards
I. IMPORTANT SAFEGUARDS 1. All the safety and operating instructions should be read before the units is operated. 2. This unit should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supply you plan to use, consult your appliance dealer or local power company. -
Page 5: Description Of Functions
II. Description of Functions The intelligent dome camera is a hi-tech CCTV product which incorporates high-clarity color camera, panoramic speed-variable PAN/TILT, multifunctional decoder, universal character generator, CPU processor, memory chip into a whole. It can largely reduce connection and installation processes of components in the system, rise up reliability of the system and facilitate installation and maintenance. -
Page 6: Setup Of The Menu Of The Dome Camera
the front part means optical multiplication while the rear part means digital multiplication. e. Description of Electronic Shutter: it is fixed on 1/50 sec after initialization when the camera is switched on, and the digital 50 appears on the screen. f. - Page 7 2.2.5 CAM DISPLAY: when it is set at ON, the camera screen will be opened. 2.2.6 RETURN: to return to MAIN MENU. CAMERA SETUP 2.3.1 SLOW SHUTTER: frame accumulation with two options Manual/Automatic. When camera screen is opened under automatic state, ASS displays on screen. 2.3.2 BACK LIGHT: backlight compensation ON/OFF.
-
Page 8: Appendix To The Menu
/ SLOW / -FAST / -NORMAL / -SLOW in which the first three grades are scan less than 180° while the later three grades larger than 180°. Adjust speed by PAN LEFT/PAN RIGHT, and operate and exit by OPEN button. The start position and the end position of auto scan are set by options 1 and 2 in this submenu. -
Page 9: Setup Of The Dome Camera
In the figure we find the preset point is No.1 with title of “NO TITLE”. Move cursor by PAN LEFT/RIGHT and modify data by TILT UP/DOWN. Press buttons for one second to speed up operation. Press CLOSE button to exit edit state and store modifications. The title of preset point has 8 characters in maximum such as 0-9, A-Z, +, - and space. -
Page 10: Setup Of Coding Switch Of Dome Camera
2. Setup of Coding Switch of Dome Camera. As shown in Figure 2, SW1 is used to set address of the dome camera from 1 – 1023. The coding switches from DIP-10 to DIP-1 are equivalent to a 10-bit binary digital. DIP-10 is MSB while DIP-1 is LSB. The state “ON”... -
Page 11: Setup Of The Baud Rate Of Communication
PANASONIC Longcomity HUNDA600 LILIN VICON MOLYNX KALATEL Reserved ALEC Ultrak Table 2 Some protocols and the states of the coding switches of normal baud rate of these protocols are shown as follows: NEON/9600Bps PANASONIC/9600Bps PELCO-D/2400Bps KALATEL/4800Bps PELCO-P/4800Bps ALEC/9600Bps PELCO-P/9600Bps Ultrak/9600Bps 4. - Page 12 Figure 3 2) The Style of Installation a) Wall Installation Figure 4 b) In-Ceiling Installation Figure 5 c) Indoor Ceiling Installation Figure 6 Indoor Embedded Installation...
-
Page 13: Steps Of Installation
Figure 6-1 2. Steps of Installation (taking wall-installing style as example) Unpacking the carton and carefully take out the dome camera and its attachments. Take out the cover of the wall-installed bracket (see Figure 7). Take out system control wires from the bracket (see Figure 8). Fix the bracket on the wall (see Figure 9). - Page 14 7) Take out the "plug and play" connector D1 (Figure 13). 8) Connect the control wires of the system as per Figure 14. 9) Insert connector D1 into the corresponding socket. Take care not to leave much wires inside the ball cover but to pull them out of the cover as shown on Figure 15. D1 PIN VIDEO+ VIDEO-...
-
Page 15: Steps Of Installation For Indoor Ceiling Style
Alarm input ALM-4 ALM-1 ALM-2 ALM-3 Alarm output No.1-channel alarm was activation, then call No.29 preset No.2-channel alarm was activation, then call No.30 preset No.3-channel alarm was activation, then call No.31 preset No.4-channel alarm was activation, then call No.32 preset Presetting the preset of NO.29 then the alarm could respond. -
Page 16: Indoor Embedded Installation
Q6: M2.5 5 round head black screw Q3: M4 1.25 stainless steel wood screw Figure 19 Figure 20 2) Fix the pedestal assembly on the ceiling (Figure 20). 3) Aiming the “MARK” on the ball at the notch on the pedestal, push the ball upward to the end and rotate clockwise until it is clicked (as shown on Figure 21). - Page 17 Base on the red spot to draw the sign (reference to Figure 32) According the material of ceiling, choice the different tools to drill (reference to Figure 33) Fixup the installation pedestal with the embedded mount (reference Figure 34)
- Page 18 Q1A: M4 12 countersunk head screw (3 pcs) Pedest al Figure 34 For easy installation, adjust the three swing mounting clips to let the distance between the clips and the flange a little longer than ceiling thickness Swing the three mounting clips to adhere to back box wall. Place the back box inside the ceiling hole.
-
Page 19: Technical Data Table
VI. Technical data table Size: 5.5 COLOR TO B/W Color CCD Horizontal Scanning Range: 360° Horizontal Scanning Speed: 0-300°/s Vertical Scanning Range: 0 90° Vertical Scanning Speed: 0-120°/s Scanning limitation: Horizontal adjustable TV format: PAL format,1/4 color SONY CCD Resolution: 520TVL Specifications Lowest Luminous:... -
Page 20: Lighting Proof And Surge Signal Proof
Self check error Switch ON again Dome camera out of Bad connection of control Press to connect well control Bad control of matrix Switch ON again Appendix : Lightning Proof and Surge Signal Proof The product adopts TVS lightning proof technology to prevent from damage by lightning strike below 1500 W and impulse signals such as surge;... -
Page 21: Appendix
Appendix : The Cleaning of Clear Down Cover To obtain constant clear videos, user should clean the down cover periodically. Be cautious when cleaning. Hold the down cover ring only to avoid direct touch to the acrylic down cover. The acid sweat mark of fingerprint will corrode the coating of down cover and scratch on down cover will cause vague images. - Page 22 form (refer to Picture 2). 1) In the Picture it is the factory default connection. The jumper is seated on Pin2&Pin3 and the termination resistor is not connected. 2) when connecting the 120 termination resistor, user should plug the jumper on Pin1&Pin2.
-
Page 23: Wire Diameter And Transmission Distance Comparison Chart
Wire diameter (mm) Transmission Distance 0.8000 1.000 1.250 2.000 Power (VA) feet (m) 283 86 451 137 716 218 1811 551 141 42 225 68 358 109 905 275 94 28 150 45 238 72 603 183 70 21 112 34 179 54 452 137 56 17... - Page 24 0.560 0.2463 0.600 0.2827 0.710 0.3958 0.750 0.4417 0.800 0.5027 0.900 0.6362 1.000 0.7854 1.250 1.2266 1.500 1.7665 2.000 3.1420 2.500 4.9080 3.000 7.0683 COMPANY : Q Digital S de RL de CV Website : http://www.qdigital.com.mx tel: +52 (33) 36501777...
Need help?
Do you have a question about the 1A-QP686 and is the answer not in the manual?
Questions and answers