Getting Connected; Enjoy Music From An External Device; Aux-In Function - K3 K3Recess Instruction Manual

Note: If there is no Bluetooth connection for a long time, you will hear a falling tune.
TO TURN OFF THE K3 RECESS SPEAKER
Press and hold the

GETTING CONNECTED

1. Set the Bluetooth function of your external device when the K3 Recess Speaker is on.
2. Set to search Bluetooth device on your external device.
NOTE: The effective distance between your external device and the K3 Recess Speaker
is 10 meters.
3. Wait for a while then find the "K3 RECESS" on the paired devices list on your external
device and press "K3 RECESS".
NOTE: Dependent on your device software, a window might ask you a password. Fill in
"0000" then press "OK" on your external device.
4. A few seconds later your Bluetooth connection is success. You can hear a series of
rising tune and the indicator light will stop flashing.

ENJOY MUSIC FROM AN EXTERNAL DEVICE

1. The indicator light will stop flashing if you get your external device paired. (See
"Getting connected");
2. Turn on the music player program on your external device and set it play. Or press
button to set it play.
3. Press and hold the
4. Press and hold the
5. Just press the
6. Just press the
7. Press the button to pause
8. Press the button again to restart to play.

AUX-IN FUNCTION

The K3 Recess Speaker can play music from some devices that have Aux-in Socket.
1. Plug the Aux-in cable into the 3.5 mm Aux-in socket of the K3 Recess Speaker and plug
the other end of Aux-in cable into the Aux-in socket of other devices that have the
Aux-in socket; ie-the device you would like to charge.
2. Turn on the unit and it will play music automatically.
3. Press and hold the
button again until the indicator turns off (i.e. no light).
button to reduce the volume;
button to increase the volume;
button to skip the start of the previous song;
button to skip the next song;
/ button to adjust volume.
6