Operating The Appliance - Nutrimaster N19001 Instruction Manual

Operating The Appliance

1. You will hear a tick sound when the power is connected.
2. Push the ON/OFF button, the screen will display the time and speed
options. Press the +/- button to set the required time and speed.
3. After setting, use your hand to hold the jar and press the "Function"
button at the same time.
NOTE: You may adjust the time and speed during operation by pressing the
+/- button. You may also press the ON/OFF button to stop the unit.
1. The unit stops automatically when the blending process is complete.
Wait until the rotary blades stopped moving then only to remove the jar
from the base. You should not place nor remove the jar when the motor
is still running.
2. Rinse and dry the jar after each use.
3. Avoid water and food juices penetrating into the lid bottom and also
avoid"water from accumulating on the table.
REMINDER
1. Softer food ingredients should be placed on the bottom of the jar and
harder food ingredients on top, so as to enhance the efficiency of the
blender.
2. When during blending the food ingredients are not moving, you should
pay attention to the following:
• Check whether the water level is sufficient.
• Check whether the sizes of the blending ingredients are too large.
• You may press the "Activate" button several times to increase the
blending speed.
• Check whether the rotary blades have loosened.
8