Sonic Wave Vibration System USER MANUAL PROFESSIONAL VC-12 PULSATION VM-10 Pulsation VM-10 Sonic Whole Body Vibration Training Equipment Professional VC-12 Read this manual carefully before use.
Disclaimers & References ....11 Package Components Please check contents of shipping box carefully. If anything is damaged or missing please contact the Sonic Life service department immediately at 877-684-7245. Power Cord Remote Control with Battery Audio Connection Cable Input...
Speci cations PROFESSIONAL VC-12 PULSATION VM-10 VM-10 F E A T U R E S VC-12 F E A T U R E S PROGRAMS: 12 Automatic Modes & Manual Mode PROGRAMS: 12 Automatic Modes & Manual Mode 3~50 Hz 3~50 Hz FREQUENCY RANGE FREQUENCY RANGE...
The power plug should not be depressed on rear side of the product. • It is recommended to use a quality Line Conditioner. A Line Conditioner protects the unit from power-related damage and performance problems. Check the Sonic Life WARNING or ATTENTION website for preferred models.
• Do not repair or modify the product In any way to avoid any consequential damage or malfunction of the product. Contact the Sonic Life Service department for any Sonic Life mechanical/electronic function questions please call: 877-684-7245.
Helps Improve Body Balance and Health *¦ The Sonic Life Vibration Equipment are very effective and efficient exercise products for those who can not exercise due to physical problems or disabilities as well for trained athletes. In only 10 minute sessions, and in a floor space of only 3 feet square, users can successfully exercise easily and quickly without stress to bones, ligaments and muscles.
Computer into the audio input jack. Pulsation Models Sonic Life Safety System Sonic Life equipment features a safety sytem which allows the machine to turn off automatically when user steps down from machine or when there is not enough weight on the machine. MODE 1:...
Control Panel & Display POWER Button/Display MODE Display Selected program or manual mode is TIME Display displayed Remaining time is displayed. INTENSITY Display FREQUENCY Display INTENSITY Control Button • Vibration intensity is displayed FREQUENCY in the range of 10~99. Control Button •...
Assembly #1 - #4 Align the guide pin of the platform to the body, then insert the bolt under the plate. With the unit’s body in place, use the Place the unit's body close to the enclosed T-wrench to fasten 3 bolts platform, and connect the 2 internal on each side (total of 6.) connection cables.
Assembly #5 - Disassembly #6 DISASSEMBLY PROCEDURE is the reverse order of the assembly procedure. Power cable must be removed prior to disassembly. Disassemble the unit following the assembly sequence in reverse order from #5 to #1. Turn the power switch "ON" Press "START"...
Manual &Pre-Programmed Training Modes SESSION INFORMATION: Do just one 10 minute session per day to start. After 7-10 days you may add another daily session as your body becomes attuned to whole body vibration. If you do add another daily session, it should be different from the session you did earlier in the day such as a Manual Mode in the morning and a Pre-Programmed Mode in the afternoon.
Never let a child or adult dismount from the machine while it is in operation. See page 5 for Safety Mode Use. *¦ Consult with Your Doctor in case of the following physical conditions prior to use of the Sonic Life equipment and any other whole body vibration equipment. *¦...
* Disclaimer: Sonic Life Products are not intended to diagnose, treat or cure any disease. The bene ts listed in this brochure are based on indepen- dent studies, listed below, which reference years of research and those studies are independent of Sonic Life products and have not been evaluated by the FDA.