Advertisement
Provided by www.ReplacementRemotes.com | For remote control help go to www.WikiRemotes.com
Remote Control Auto-Find
If Progra mm ing the R e m ote did not find your code, try this procedure to auto m atically find
the code for your device. If your re m ote beco m es inoperable, go back to "Progra mm ing your
R e m ote" and enter the Z enith TV code for step five
1
Turn on the device you're programming for the
remote control.
2
Press and hold the PRG key until the indicator light
turns on.
3
Press the key for the device you're trying to program
(CABLE, VCR, AUX, TV).
4
Enter the code 0-0-0 (zero-zero-zero), then press the
ENTER key right away.
5
Aim the remote at the correct device and press
POWER. Allow a second to pass, then push the
POWER key again. Repeat until the device turns off.
(This is a trial and error process, so it may be neces-
sary to repeat these steps until the remote finds your
code.)
6
Push ENTER to save the code.
7
Press POWER to turn the device back on.
You can quickly get out of Auto Find by press-
ing Q U IT.
If the indicator light stays on while you push
Power, instead of turning off, all the codes
have been tried and your device can't be pro-
gra mm ed.
To Purchase original remote controls and manuals go to www.ReplacementRemotes.com
PAGE
05
2
PRG
Indicator Light
VCR
CABLE
SURF
FLASHBK
CHANNEL
VOLUME
CHANNEL
1
4
7
4
0
MENU
RECORD
PAUSE
PLAY
REWIND
STOP
5/7
POWER
3
AUX
TV
MUTE
VOLUME
2
3
5
6
8
9
6
ENTER
QUIT
TV/VCR
TIMER
SOURCE
FFWD
206-3492-O
Advertisement
