Page 1
JM POSNER Crepe Maker model number - JMP-CCM INSTRUCTION MANUAL For your safety and continued enjoyment of this product, always read the in- struction book carefully before using.
Page 2
The appliance should not be cleaned with a water jet. HELP If the Crepe plate does not work, please check the following: 1. The power supply is correct and the red is light on. 2. The thermostat is correct. BASIC SPECIFICATION Model Voltage Power Dimension JMP-CCM 220-240V/50/60Hz 2700W 400×400×162mm...
Page 3
EXPLODED DIAGRAM CAST IRON PLATE INSTALLATION Note: Please take off the plastic film from the unit. Take out the Crepe plate from the packaging and locate the unit on a firm level surface. When this appliance is to be positioned in close proximity to a wall,...
Page 4
partitions, kitchen furniture, etc., it is recommended that they be made of non-combustible material, if not, they should be clad with a suitable non-combustible heat-insulating material, and that close attention should be paid to fire prevention regulations. Once the Crepe Maker has been placed in position, clean the cast iron plate thoroughly.
Need help?
Do you have a question about the JMP-CCM and is the answer not in the manual?
Questions and answers