Monster Power PRO 7000 Owner's Manual page 28

LIT_PRO7000_manual.qxd 11/10/2003
19. Analog Filter Fuse: 2A slow-blow fuse protects the ANALOG FILTER from power overload. Replace only
with same type/rating fuse.
20. Digital Filter 1 Outlets: For digital components such as Digital Multitrack, DAT Machine, Minidisk,
Digital Signal Processor, or Recorder. This special filter circuit reduces interference from other connected
components and prevents digital noise from contaminating the rest of your system. High quality GFI
(Ground Fault Indicator) outlets permit Balanced (grounded) transformer operation or Isolated (ground-lifted)
Noise Reduction Mode transformer operation.
21. Digital Fuse: 2A slow-blow fuse protects DIGITAL FILTER 1 and DIGITAL FILTER 2 from power overload.
Replace only with the same type/rating fuse.
22. Digital Filter 2 Outlets: For digital components such as Digital Multitrack, DAT Machine, Minidisk,
Digital Signal Processor, or Recorder. This special filter circuit reduces interference from other connected
components and prevents digital noise from contaminating the rest of your system. High quality GFI
(Ground Fault Indicator) outlets permit Balanced (grounded) transformer operation or Isolated (ground-lifted)
Noise Reduction Mode transformer operation.
23. Computer Filter Outlets: A special filter circuit reduces interference such as wide-band digital noise that
can degrade computer performance.
NOTE: Digital or low-current audio equipment will not be harmed if connected to the computer outlet
section. However, for best performance we recommend using only computer components with these outlets.
21
4:30 PM Page 22
NUMBERS REFER TO DRAWINGS ON PAGE 18