Monster Power PRO 7000 Owner's Manual page 19

LIT_PRO7000_manual.qxd 11/10/2003
Step 6
This feature allows your PowerSource to be turned on and off with an Automatic Switching Control.
A component that shouldn't be powered on constantly (such as an amplifier) can be plugged into one
of the SWITCHED ON AFTER DELAY outlets and activated when needed. This feature also allows
the DC low-voltage cable to control multiple PowerSources.
A) Plug a 1/8" mini-plug cable into the REMOTE IN DC 3
B) Plug the other end of the cable into the corresponding outlet on a component with a 12V trigger output.
4:30 PM Page 13
Remote DC Control Hookup
(see diagram below).
When powered up, the PowerSource's outlets programmed as SWITCHED ON will power on immediately.
The outlets programmed as SWITCHED ON AFTER DELAY will power on after the set delay.
Analog Filter 1 Digital Filter
XLR LAMP
MAX OUTPUT
12 VDC 3W
PRO7000
Professional Reference PowerSource ™
ANALOG FILTER FUSE DIGITAL FILTER FUSE
with Dual Balanced Pure Power ™ 2A SB NO. 1 2A SB NO. 1
Illustration of rear panel showing remote in DC 3-30V
-
30V outlet on the PowerSource
2 Computer Filter 1 High Power 2
Filter
NORMAL BALANCED
(ISOLATED)
NOISE REDUCTION
MODE
COMPUTER FILTER FUSE
10A SB NO. 1
XLR LAMP
DIMMER
DC IN
3-30V
GROUND
XLR LAMP
AC IN
120V
BREAKER 15A
MAX OUTPUT
12 VDC 3W
DC OUT
12V
AC 120V
60Hz
1440W CONTINUOUS
(1800W MAX)
PHONE
IN OUT
12