Page 1
Bio-HEPA Hybrid Air Purifier MHI-6800 Thank you for using our product. You have purchased a high-quality product with one-year free product warranty. Your satisfaction means everything to us. We look forward to serving you at all times. To help you operate this device, please...
Page 2
Ensure that all safety precautions are followed when using electrical appliances for the proper operation of the device. This instruction booklet describes the safety precautions to be observed during operation to prevent injuries to yourself ,other persons and damage to the device. The content not only is suitable for this product but also suitable for electrical appliances in general.
Page 3
Fkhhgtgpv"Rctvu Yjqng"Wpkv"1"Htqpv"Xkgy" Air Outlet Dust Sensor Air Inlets Air Inlets Bottom Stand Yjqng"Wpkv"1"Eqpvtqn"Rcpgn Odor Sensor CLEAN METAL GRID REPLACE FILTER RESET...
Page 4
Back and Interior View [ Back View ] [ Interior View ] CLEAN METAL GRID REPLACE FILTER RESET...
Page 5
CLEAN METAL GRID REPLACE FILTER RESET But the of the sensor...
Page 7
from to turn off Timer duration duration...
Page 8
During cleaning and maintenance,please turn off and disconnect the plug from the power outlet. Assemble the Removing Removing Removing please ensure that the filter is installed correctly with the...
Page 9
from CLEAN METAL GRID REPLACE FILTER RESET to avoid scraping or scratching the coating on the cover. Remove UV lamp before cleaning Use a slightly damp cloth to wipe & clean...
Page 10
Take out Put back the sensor correctly after cleaning, make sure that the cord is reconnected in the correct direction.
Page 11
CLEAN METAL GRID REPLACE FILTER making sound RESET Remove...
Page 12
If the dirt is hard to remove, pre-soak in diluted detergent and then use a toothbrush to clean. be careful removed or discarded this would result in if you want to purchase cause rusting ensure that the unit is completely dry...
Page 13
CLEAN METAL GRID REPLACE FILTER RESET Replacing the UV lamp not functioning, Remove Carefully replace with Resetting please reset being with the power during this resetting operation. pointed depress inside the unit. 1.CLEAN METAL GRID Indicator CLEAN METAL GRID REPLACE FILTER RESET CLEAN METAL GRID indicator RESET...
Page 14
Sensor sensor sensor the source of pollution was created indoor (e.g.smoking). sensor Use a This will not working...
Page 15
Why is the filter not getting rid of dust and odor effectively ? Please check have Check and make sure that the power cord is securely connected to the power outlet. Please ensure that the uint has been properly reassembled after cleaning and maintenance. The unit will not operate if the plasma dust collector or the front cover is not properly installed.
Page 16
UCNGU" the unit to a URGEKHKECVKQPU" Rated voltage Europe AC230V / 50Hz Power consumption 80W Ion output 2x10 /cm Acative oxygen output 0.05ppm -90m UV spectrum 20 w/cm (at 10cm distance) Bio-HEPA One year from the Hybrid Air Purifier date of purchase Name &...