Monster Power PowerCenter 15 Amp Owner's Manual page 19

B) Connect the output wires extending from the Surge Module to the two-outlet receptacle as follows:
1. Remove the three screws from the side of the two-outlet receptacle by turning each counterclockwise until loose.
2. Align the ring terminal holes on the output wires with the screw holes.
3. Reinsert the three screws and turn each clockwise until fully tightened.
C) Attach the included gold-plated grounding plate and both the two-outlet receptacle and the Surge Module to
the two gang outlet box by tucking any excess wire away, aligning the holes between the gold-plated grounding
plate, the two (2) units, and the two (2) gang outlet box, inserting four (4) included silver screws (2 each unit), and
turning each clockwise until secure.
HOOK-UP GUIDE – REMOTE APPLICATIONS
13