Power Switch Side - Gateway M1200 User Manual

Chapter 1: Checking Out Your Gateway Tablet PC

Power switch side

Power
connector
Item
Power connector
Power switch
Antenna zone
PC Card slot
Pen tether
anchor
4
Antenna area
Power switch
Function
Plug the AC power adapter into this connector. Do not substitute
another adapter or use this connector for any other purpose.
Turn on the tablet by sliding and holding the switch for about
½ second.
When the Gateway Tablet PC is on, slide the switch briefly to
activate Standby (or Hibernate if it is enabled through the Control
Panel's Power Options Properties dialog box).
Sliding and holding the switch for more than 4 seconds (when the
tablet is turned on) will cause a forced shutdown, which is the last
resort when the tablet is completely unresponsive.
The wireless networking antennas are located in this area. Be sure
to keep your hands clear of this zone when using wireless
connectivity in areas where reception is weak.
Holds one Type-II PC Card for networking, memory expansion, or
peripheral connections. A plastic blank ships with the Gateway
Tablet PC, and you can leave it in place whenever the slot is not in
use.
Use this tether anchor to tether the pen to the tablet.
www.gateway.com
PC Card slot Pen tether
anchor