Disassembly Procedures - Yamaha CDX-596 Service Manual

CDX-596

DISASSEMBLY PROCEDURES

1. Removal of Top Cover
a. Remove 4 screws (
1
b. Lift the Top Cover at the rear and move it rear-ward.
2. Removal of Front Panel
a. Press the OPEN/CLOSE key and open the tray.
Then remove the Lid attached to the front edge of the
tray in Fig. 2.
Press the OPEN/CLOSE key and close the tray, then
unplug the power cord.
b. Remove 3 connectors (CB100, CB202, CB301) in Fig.
2.
c. Remove 5 ( ) screws in Fig. 1.
3
d. Remove 2 hooks and then pull the Front Panel forward.
3. Removal of CD Mechanism Unit
a. Remove 3 connectors (CB1, CB2, CB3) in Fig. 2.
b. Remove 4 screws (
4
4. Removal of Tray Unit
a. Remove 2 screws (
5
ing Unit in Fig. 3.
b. Remove 1 hook and then remove the Stopper Pin in
Fig. 3.
c. Rotate the Drive Gear and then open the Tray Unit in
Fig. 3.
d. Detach the Stoppers on both sides and then pull out
the Tray in Fig. 3.
5. Removal of Pick-up Head
a. Remove 2 screws ( 6
b. Remove 4 screws (
7
Unit in Fig. 4.
c. Remove the gear A in Fig. 5.
d. Pull out the Sled Shaft in Fig. 5.
e. Remove the Pick-up Head.
Chucking Unit
Stopper
Drive Gear
5
) and 3 screws ( ) in Fig. 1.
2
) in Fig. 1.
) and then remove the Chuck-
) in Fig. 4.
) and then remove the Drive
Stopper Pin
5
Hook
Stopper
Fig. 3
(Remove parts in disassembly order as numbered.)
Top Cover
1
4
Front Panel
3
Lid
CB203
Sub Chassis (S)
Drive Unit
7
2
4
CD Mechanism
Unit
1
3
CB201
PJ101 CB101 PJ100
W201
CB200
W202
CB1
CB2
CB301
CB100
CB3
6
7
Fig. 1
Fig. 2
Fig. 4