Monster Power Signature HTS 5100 MKII Owner's Manual page 23

Remote "DC Out" Control Hook-Up
This feature connects your PowerCenter to an automated Home Theater control system or allows the PowerCenter
to automatically turn on and off another component with a Remote "DC In" connection.
A) Plug one end of the 1/8" mini-plug into the corresponding Remote "DC Out" connection on the PowerCenter.
B) Plug the other end of the 1/8" mini-plug into the Remote "DC In" connection on the component
that you want the PowerCenter to control. Note: This component may not label the connection "DC In".
Make sure it accepts control voltages between 3-30 volts DC.
NOTE: One (1) 1/8" mini-plug cable is supplied with the PowerCenter.
REMOTE DC OUT
12V/300mA
REMOTE "DC Out" Control
������������������
�����
����
�����
�����
To Control
Component
17