Page 2
8. Vortex tubes require high pressure air, 60-100psi, and will not operate on these breathing air compressor systems. Use Air Systems’ Cool-Box for air cooling; order model BACB- 196LP. Provides approximately 50º output air temperature.
& O ETUP PERATION Step 1) Wire compressor to electrical box with disconnect or attach an applicable plug to end of power cord. Compressor can be wired for 230 VAC/3 phase or 460 VAC/3 phase. Note: Check the tag wire tied to the power cord for the proper voltage. If the voltage needs to be changed, refer to the electric motor wiring diagram.
Page 5
Air Systems’ manufactured equipment is warranted to the original user against defects in workmanship or materials under normal use for one year after date of purchase. Any part which is determined by Air Systems to be defective in material or workmanship will be, as the exclusive remedy, repaired or replaced at Air Systems’...