Smartphone, and simple to use, and requires no installation, no monthly service, and no contract. The WAlert is based on a unique patented intrusion sensing technology that can detect intrusion into a house with a floor space up to 2000 SQ, without the installation of any wired or wireless door/window contacts or glass break sensors.
Warranty Period of one (1) year as follows: 1. LABOR: During the Warranty Period if this Product is determined to be defective, WataSensor will repair or replace the Product, at its option at no charge, or pay the labor charges to any aJile authorized service facility.
2.1 WALERT Client Application Installation Procedure 1. For iOs devices, download the WALERT app for free from App Store a. Open the App Store app and search for “WAlert" and download WAlert app. b. Launch WAlert app from the iPhone’s app screen.
Page 6
If the registration is successful, the "Login" screen pops up with the registered user name and associated password. b. Tap "SIGN IN" icon to login the cloud based WAlert server. If the login is successful, the home page pops up with the blue ring as shown below.
Page 7
Page 7 of 21 3. Go to step 4, if the WAlert device has already setup with the current router under the same user name (device has been unplugged and re-plugged. Tap to open the menu as shown to right.
Page 8
2 with the two beeps 5. Press and hold for 3 seconds the Setup button located at the lower right side of the WAlert device. Wait for the three short beeps and continue to the step 6 6.Tap blinking >...
Page 9
Page 9 of 21 Tap "Settings" to select Wi-Fi network Tap " Wi-Fi" to select WAlert ad-hoc Wi-Fi network as shown below...
Page 10
Page 10 of 21 Tap "Back to WAlert" on top let corner to switch back to WAlert client as shown below The "Step 3" window pops up with SSID of the home Wi-Fi. Enter password associated with the home router...
Page 11
Page 11 of 21 The Finish window pops up. It shows the network setup for WAlert is completing.
Page 12
WAlert device but will connect to 3/4G for data transfer. Users need to manually disable the 3/4G data mode during the WAlert setup. Thereafter the 3/4G data mode can be re-enabled after the setup is completed.
3.2 Alerts Alerts are sent to the smart phone when the WALERT device detects door/windows open. The phone will vibrate upon receiving the notification and an “WALERT Alert” icon will appear on the WALERT home page. Once the door is opened, a siren is triggered, and...
Page 15 of 21 Tap the red circle It shows the list of alerts associated dates and times when the alerts have happened. Users have two options either make a phone call for help or open the networked IP camera to monitor. 1.
Page 16
Page 16 of 21 The History page pops up. It shows a list of missing alerts with the associated date and time.
Page 17 of 21 3.3 Settings Tap the green circle The WALERT Settings screen pops up and shows the available configurable options: 1. Sensitivity level 2. Buzzer o Duration in seconds o On/off 3. Software update 4. Room name 5. Tap blinking to saved the new configuration 6.
Page 18
Page 18 of 21 Tap Sign out under menu bar.
FAQs Can user use multiple smart phones with a single WALERT device? Yes. The client app is free and a single WALERT device can be connected with multiple smart phones using the same registered user name and associated password. How many WA device can be deployed per home? It is dependent on house type.
2. Tap the blinking 3. The home page pops up as shown below, the color of the circle stays blue instead of changing to green. The device generates two short beeps, that WAlert device has not been setup successfully. Resolution In this case, users need to go back to the step 3 or exit the app and restart the setup sequence again.
Page 21
Restart the WALERT client app from the Android home page WALERT application shuts down If the Android operating system decides the WALERT client application is not responsive, the following message will be displayed and request a force close of the application.