Advertisement
Quick Links
Advertisement
Summary of Contents for Lamperd MSS100
- Page 1 Mobile Surveillance System MSS (MSS100- Law Enforcement) User Manual...
-
Page 2: Read Before Use
Read Before Use Before operating the unit, please read this manual thoroughly, and retain it for future reference Law in your country may prohibit the use of surveillance devices. The Mobile Camera is not o nly a h igh-‐performance r ecording c amera b ut a lso c an b e p art o f a f lexible surveillance ... - Page 3 1. Structure Diagram 1.1. Host Machine 3 ...
- Page 4 4 ...
- Page 5 2. The operation of the button 2.1. Power on/ off ( ) long press to turn on/off the machine. 2.2. Record video/ intercom ( ) short press to turn on/off the video recording; long press to intercom 2.3. Take photo/menu ( ) short press to take photo;...
-
Page 6: Indicator Lights
3. Indicator lights These are the state indicator lights of working or standby, and it will not repeat on the basic operation. State indicator lights1 State indicator lights 2 Turn on Green Blue Record video Red flash Blue Sleep Not light Blue flash Charging Green... - Page 7 1. The top left corner is the remaining recording time of the SD card; 2. The top right corner is the SD card and battery power; 3. The second line is the system date and time; 4. Last second line is the ID number of the policeman; 5.
- Page 8 4.4. IR lights and filter switcher’s turn on/off After getting power, the IR lights are defaulted to turn off, and filter switch to color lens, which suit for the daytime. Once using at night, you can press “IR on/off” to open the IR lights, and the filter switch to demo lens.
- Page 9 4.9. Reset The machine doesn’t have the reset button 4.10. Charging of the machine Appearance of the low power: when the battery is on the low power, the icon in the top right corner turn to red and flash, the buzzer appear the “tick..tick…” sound, and then about 5 minutes later it auto power-off.
- Page 10 4.14. Specification Technical specifications Description Image sensor 5 Mega-Pixel, CMOS sensor Camera 5M pixels, More than 130° wide-angle, IR camera, laser positioning TFT screen 2.0inch 16:9 TFT LCD 960*240 Viewable distance Up to 20 M at "0" Lux darkness Video 1920*1080/30fps, 1280 *720(30-60fps), 720*480/(30- 60fps).
- Page 11 5. MSS USB driver installation Insert the CD into the computer drives, according to this route to enter the USB installation item: CD:\Win7\DirectUSB-2.0.9.0-Setup_64bit , then run the file, and follow the prompt to install it: Double Click on “DirectUSB-2.0.9.0-Setup”, and the DirectUSB Setup Wizard will start as showing below: ...
- Page 12 Follow the Setup steps 12 ...
- Page 13 From the Software CD copy the .dll files (Highlighted Below) to your computer to be able to execute the software: When you Double Click on “HRecord”, the Management Software will execute and the Window below will pop out: 13 ...
- Page 14 To access the Management Software and be able to change the settings, connect the device to the USB port and run the software. You must enter the default password “000000”, six zeros and click on “Connect Device” Connect Device will take you to the device settings o Click the “enter U disk”...
- Page 15 o Set time Click the “set time” button, enter to set time for the police DVR, the time of the DVR is auto-synchronization with the computer, after successful setting, it will show on the computer. o Change the password ...
- Page 16 o Set the ID number Click the “ID number sets” button; enter to set the ID number for the police DVR. ...
Need help?
Do you have a question about the MSS100 and is the answer not in the manual?
Questions and answers