Operating Manual - Cherry KC 1068 Operating Manual

Corded keyboard with ip68 protection
Hide thumbs Also See for KC 1068:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 6

OPERATING MANUAL

CHERRY KC 1068 – Corded Keyboard with IP68 Protection
Congratulations!
CHERRY has developed and produced innovative
input systems for computers since 1967. You can
now experience the difference in quality,
reliability and design with your new favourite
GB
accessory.
Always insist on original CHERRY products.
For information on other products, downloads
and much more, visit us at www.cherry.de.
1 Connecting keyboard
• Connect the keyboard to the USB port of the
PC/laptop.
The keyboard is ready to use without installing
any software.
2 KeyM@n software
You can configure the F-keys and Hotkeys
(except standby) using KeyM@n software (as a
free download at: www.cherry.de ->
Help & Support -> Downloads ->
CHERRY KC 1068).
Try it and see!
6
3 Protective film for the
keyboard
The film protects the keyboard against dust, dirt
and water (up to a depth of 1m) (IP68 tested).
The USB plug is not protected to IP68 even with
the supplied cap.
The keyboard film is resistant to water,
detergent, isopropyl alcohol and diesel.
The protective film does not contain polybromi-
nated diphenyl ether and is free from halogens
and latex.
When you remove the protective film you can
only use the keyboard in the same way as a
normal keyboard, without protection against
environmental influences.
NOTE: Sharp objects may damage the
film
• Avoid the film being pierced or cut by sharp
objects.
• Do not fold out the keyboard's adjustable feet.
4 Tips
4.1 Cleaning the protective film
NOTE: aggressive cleaning agents or
liquid in the plug may cause damage
• Do not remove the keyboard's protective film.
• Do not use any abrasive cleaners or scourers
when cleaning.
• Prevent any liquid from getting inside the
plug.
• Do not clean the keyboard in the dishwasher.
1 Switch off the PC or pull the plug out of the
keyboard.
2 Clean the protective film with a slightly
damp cloth and some mild detergent (such
as washing-up liquid) or isopropyl alcohol.
3 Dry the protective film with a soft, lint-free
cloth.
You can find further information on cleaning
and disinfection at: www.cherry.de ->
Help & Support -> Downloads ->
CHERRY KC 1068.

Advertisement

Table of Contents
loading

Table of Contents