Page 1
Magnesium ™ Upright Vacuum Magnesium | Magnesium RS | Magnesium SW | Magnesium ™ ™ ™ ™ User’s Manual POWERFUL LIGHTWEIGHT EASY TO USE MULTI-SURFACE 3 YEAR WARRANTY Model no. OK2 Important! Also Includes Read this manual carefully, and keep for future reference. The Ultimate Handheld A portable, lightweight, and powerful vacuum.
6 Bag Dock 14 Cover Thank you for purchasing the Oreck Magnesium cleaner. The inner bag is already installed. Simply install the handle and you are ready to enjoy your new Oreck Magnesium Upright Vacuum Cleaner. Technical Specifications Model no: OK2...
7. T he appliance should only be used 24. D o not let the unit run while in as described in this user guide. any stationary position for any period of time. Keep the unit 8. O nly ORECK recommended moving while in operation. Do attachments should be used with not operate the unit while in the this appliance. upright and locked position. 9. D o not use this vacuum cleaner if it has been dropped, damaged, left outdoors or dropped into WARNING: Always switch off and water. Do not use this vacuum unplug the vacuum cleaner from the cleaner with a damaged cord electrical socket before assembling, or plug.
Page 4
Pull on the handle to ensure it is secured into position. Twist the cord release 1/2 turn, and carefully take all of the cord off the machine. Getting ready to vacuum:...
Be sure the disposable inner bag is installed properly. NOTE: All disposable inner bags are not the same. Oreck offers HEPA inner bags. Your Oreck HEPA inner bags have been designed to be used with the ORECK Upright vacuum. Using bags other than genuine Oreck HEPA disposable inner bags will affect the cleaning ability of your vacuum and could cause damage to it.
Simple Operating Tips Replacing the Brushroll You’ll love the way your Oreck cleans under things and is SO The brushroll is designed for long life. Should it ever become worn or frayed, it can be replaced by an Oreck Authorized Service Center.
Page 7
USE & MAINTENANCE Disassembling the Handle Note: The upper handle assembly is held in place by two spring loaded pins. To remove the handle, both spring loaded pins must be depressed at the same time. Place the unit on a table so that the vacuum handle is at eye level.
• Brushroll is not even at both ends. • Contact us on AU: 1300 361 505 / NZ: 0800 800 900 Vacuum still does not • Check all the above points. • Contact an Oreck authorised service agent. operate properly. Unit stops and front • Jammed brushroll •...
TROUBLESHOOTING & PARTS Service problems that appear to be major can often be solved easily. You can be your own troubleshooter by reviewing this guide. All other servicing should be done by an Oreck authorized service center. ANZ DISTRIBUTOR: Techtronic Industries Australia Pty Ltd...
Need help?
Do you have a question about the Magnesium OK2 and is the answer not in the manual?
Questions and answers