Orientalmotor NETC01-CC User Manual page 17

STEP 2 Check the connection and termination resistor
Termination resistor (SW3): ON
FG
CRD-KD
STEP 3 Turn on the power and check the setting
Check that the LED condition has become as shown in the figures.
Green Lit
Off
Green Lit
Off
• When C-ERR (red) of the CRD-KD or NETC01-CC is lit: Check the transmission rate or address number
of RS-485 communication.
• When L-ERR (red) of the NETC01-CC is lit: Check the type of the CC-Link communication error.
Termination resistor (SW3): ON
RS-485 communication cable
FG
NETC01-CC
Green Lit
Green Lit
Termination resistor
(110 Ω 1/2 W)
CC-Link communication
cable
Termination resistor
FG
(110 Ω 1/2 W)
Off
Off
Guidance
Programmable controller
or master device
Green Lit
Off
Green Lit
Green Lit
−17−