Download Print this page

Sanyo EM-C1900M Service Manual page 15

Advertisement

Maintenaunce:
The microwave ovens are designed, manufactured, and tested for years of dependable operation. Howevre, the
oven may require service from time to time if the consumable components listed below are not replaced at the
appropriate time. For protection from unexpected service calls and undue inconvenience, we recommend that
the user has the listed parts replaced at the intervals belows,(at customer cost).
This will avoid the trouble of repeated service calls after the expiration of the warranty period.
Consumable components:
When more than 1,250 hours of accumulative cooking time or more than 200,000 cycles of door opening/closing
is observed by key operations (See page 13 for more information), the following consumable components shoud
be replaced.
(Maintenance light in window display indicates when accumulativ cooking time reaches 1,250 hours.)
1. Magnetron Tubu, Part No. 415 003 1709
2. Printed Circuit Board-Relay, Part No. 617 202 0150
3. Switch base Assembly, Part No. 617 206 7865
4. Door Latch, part No. 617 068 1087
When more than 2,000 hours of accumulative cooking time is observed, the following consumable components
should be replaced.
5. Blower motor, Part No. 617 196 9245
When slow rotating of blower motor is observed after removing dust from blower motor, blower motor must
be replaced.
6. Door hinge, Part No. 617 120 3028
When a worn door hinge is observed and proper door adjustments can not be made, the door hinge must
be replaced.
7. Door Assembly, Part No. 617 239 6354
When a worn door pin is observed and proper door adjustments can not be made, the door assembly must
be replaced.
- 14 -

Advertisement

loading