Page 1
N E T W O R K P L A Y E R 1 5 0 Short Operation Guide...
Page 2
Apple® Inc., registered in the U.S.A. and other countries. HIGHRESAUDIO is a registered trademark. Using third-party services (Internet radio, music streaming services) with the 150 Network Player is subject to any terms of use of those suppliers, as well as technical requirements for the user such as Internet access and service availability over which Burmester Audiosysteme GmbH has no control.
Establishing a LAN connection between Router and computer ......13 Establishing a Wi-Fi connection between Network Player and Tablet/PC/Mac ... . .13 Network Player 150...
Page 4
How to play content from the Network?......14 How to play Content from a USB storage device?..... . 14 How to play Content from the Internet? .
Network Player (Software Version 2.51) safely and to its full potential. To use all the functions of the 150 Network Player you will need either an Apple iPad® with the free BurmesterMC App installed or any computer (PC, Tablet, Mac) with a Web browser (iPad®...
Important Safety InformatIon Important Safety Information Opening the device Do not open the device. The device does not contain any parts that can be maintained by the user. Fuses inside the device may only be replaced by authorized staff, such as your specialist dealer.
Unpacking the Network Player Place the box on the fl oor and carefully remove the 150 and its accessories. Place the device on a stable, level surface. Protect the device from heat and humidity. Connect the 150 as described in the following chapter.
InStallInG tHe network player Connecting the Network Player to a power amplifi er The Network Player features balanced XLR terminals as well as unbalanced RCA connectors for an analog connection to a power amplifi er. We recom- mend a balanced connection for superior sound. Make sure all components to be connected are switched off.
Player on. The switch returns to center position. The LED is lit red. Pushing the switch up again returns the player to standby mode. 5 LED (operation/standby) • LED is lit orange: The device is in standby mode. • LED is lit red: The device is turned on. Network Player 150...
How to SwItcH tHe player on? How to switch the Player on? The MAINS switch on the rear panel is set to I (On). Move the POWER switch on the front panel to the center position. After a delay of up to 3 seconds the LED lights ª...
Network Player automatically. Note: If you have problems with establishing a network connection you can also con- tact your Burmester dealer who would be glad to assist you with the installation. Establishing a network connection using Wi-Fi Router Press the OSD key on the remote control and then the buttons 7 – 8 – 9.
How to connect computer and network player? Note: If you are using an iPad® you can also open the App BurmesterMC after connecting iPad® and Network Player. Select Confi gure, the browser starts automatically and the list of available Wi-Fi networks appears. Note: in case of a hidden Wi-Fi network select Not in List (hidden ssid) and type in the Name of the Wi-Fi network in the SSID box.
— Name of the network (SSID): Networkplayer150 — Password: Burmester150 ► In case of a Wi-Fi connection via a router use the following specifi cations: — Name of the network (SSID): Name of the router — Password: Wi-Fi password of the router network player 150...
The user interface and therefore the presentation of the available music depends on whether a Burmester Musiccenter or a server of a different make has been selected as source. Please find more information in the separate Manuals "User Guide for Operation via the iPad®...
Making use of services from outside suppliers such as Internet radio or music streaming services with the Network Player 150 may be subject to separate conditions of use as well as to technical capabilities of the user or the outside supplier (Internet availability;...