Intel PC Camera Pro Pack Getting Started Manual page 8

Note
When installing on a
computer running
Windows* 95,
select Microsoft
WDM Image
Capture on the
Video Device
Detection screen.
Note
For help with
problems that can
occur during the
Configuration
Wizard see
Appendix A
Troubleshooting in
the User's Manual.
6
8 On the Video Device Detection screen, select the
Intel PC Camera Pro. Click Next to continue.
9 On the Video Hardware Test screen you should
see a picture from your camera in the video win-
dow. To adjust the picture click Advanced to
bring up the Video Source tab.
If you do NOT see live video, your camera may
not be configured properly. For solutions, visit the
Troubleshooting Assistant at http://sup-
port.intel.com/support/createshare/camera-
pack/tsa.htm.
10 The Device Profile test profiles the camera and
tunes the Intel Video Phone software for the best
video quality. Click Test to test the video camera.
11 The DirectDraw* test verifies that your computer
can run DirectDraw. DirectDraw lets you view the
other person's video at full screen during a video
call with Intel Video Phone software. If the video
picture is clear, click Yes to enable DirectDraw. If
anything else happens, click Next. You will still
be able to see the other person's video during a
call, but not full screen.
12 Configuration Completed screen. Click Finish to
close the Configuration Wizard.
GETTING STARTED GUIDE