How To Charge Your Device With Your Jhub Elite - Modern Portable jHub Elite User Manual

4. How To Charge Your Device With Your jHub Elite

First press the button on the top of the jHub Elite to turn
on. The jHub Elite is engineered to charge all USB devices
(current input must be higher than 50 mA). There are two
USB output ports. Port 1 is 1 Amp port which is great for
charging smart phones along with other devices and Port 2
is 2.1 Amp which is great for charging tablets. Once your
device is plugged into the jHub Elite it will instantly begin
charging your device properly. Indicator lights will
illuminate to show what percentage of charge the jHub
Elite currently has. Once the jHub Elite has stopped
charging your device you are able to turn off the jHub Elite
by holding down the button on the top until the indicator
lights turn off. If you need to charge your jHub Elite please
follow instructions for charging the jHub Elite in Section 3.
1. Plug your USB Cable into the jHub Elite USB charging
port (either port depending on what device you are
charging)
2. Connect the other end of your cable into you device
5 | P a g e