Congratulations on your My Life My Shop purchase. TABLE OF CONTENTS The Cor1 Blood Pressure Monitor will Safety Information ..........1 allow you to measure vital blood Cor1 LCD Display ..........5 Monitor Components ........7 pressure parameters wherever you go.
SAFETY INFORMATION SAFETY INFORMATION The Cor1 BPM measures systolic and diastolic Symbol Description blood pressure and pulse rate of an adult by The Operation Guide Must be Read using a pressurized cuff on the left wrist. The device is not intended for use on infants and Serial Number children.
Page 4
CAUTION CAUTION Read this user manual thoroughly before use. • This device is not suitable for continuous This device is designed and manufactured to monitoring during medical emergencies or operate within defined design limits. Misuse operations. may result in harm. The following should be •...
COR1 LCD DISPLAY Memory Hype. Symbol Description Explanation Systolic Blood High Pressure Result Pressure Diastolic Blood Low Pressure Result Pressure Heart Beats per Minute Memory See Page 14 Results in Inaccurate Movement Error Measurement Low Battery Replace Batteries Norm. Measurement Unit 1kPa=7.5mmHG...
(Type B Applied Part) Replace the Batteries Under these Conditions • displays on the LCD Battery Components Compartment Included • The LCD display dims 1-Cor1 Unit • When powering the monitor on, the LCD 2-AAA Batteries does not light up 1-Instruction Manual...
AND MEASUREMENT UNIT Please set the date and time before your 5. Select the 24 hours time initial use of the Cor1 to ensure each record format or the 12 hours time format. Repeat steps 2 and is labeled with the appropriate time stamp.
POSITIONING THE CUFF MEASUREMENT TIPS Following these additional tips when taking 1. Remove your watch and/or jewelry from a measurement to get a more accurate your left hand. (If your physician has reading. Measurement taking under any of diagnosed you with poor circulation in the following circumstances may result in your left wrist, use your right wrist.) inaccurate readings.
TAKING A MEASUREMENT RECALLING RECORDS After correctly positioning the cuff, press 1. With the monitor off, press “MEM” button START/STOP button to turn on the monitor, to access the memory. The latest record and it will complete the measurement will be displayed first. process.
T W O - Y E A R W A R R A N T Y When inaccurate measurement This My Life My Shop product is warranted to be free obtained, you can delete all the saved of manufacturer’s defects in materials or workmanship measurement results by following below for two years from the date of purchase.
MAINTENANCE MAINTENANCE To obtain the best performance, please follow all instructions. Follow instructions for correct replacement of interchangeable or detachable parts as specified by MANUFACTURER or SERVICE Store in a dry place and Avoid getting the monitor avoid direct sunlight. wet, clean with a dry cloth.
SYSTOLIC & DIASTOLIC STANDARD BLOOD PRESSURE What are systolic pressure and diastolic The chart below shows the standard blood blood pressure? pressure classifications as published by the American Heart Association (AHA). When ventricles contract and pump blood out of the heart, the blood pressure reaches Blood Pressure Systolic Diastolic...
IRREGULAR HEARTBEAT DETECTOR FREQUENTLY ASKED QUESTIONS Why does my blood pressure fluctuate? This Blood Pressure Monitor is equipped with There are multiple reasons behind fluctuations an Irregular Heartbeat (IHB) Detector. During in your readings, including the way you tie the each measurement, it records your heartbeat cuff on, the position in which you sit or level of intervals...
TROUBLESHOOTING SPECIFICATIONS This section includes a list of error messages Power supply 2*AAA alkaline batteries (3V) and frequently asked questions for problems Display mode Digital LCD V.A 44×31.5mm you may encounter with your blood pressure Measurement mode Oscillographic testing moder monitor.
COMPLIED STANDARDS EMC GUIDANCE Table 6 ISO 14971:2012 Medical devices — Application of risk Risk Management Recommended separation distances between portable and mobile RF management to medical devices. communications equipment and the ME EQUIPMENT or ME SYSTEM – for ME ISO 15223-1:2012 Medical devices.
Page 16
EMC GUIDANCE EMC GUIDANCE Table 2 Table 4 Guidance and Manufacturer’s declaration – electromagnetic Guidance and Manufacturer’s declaration – electromagnetic IMMUNITY – for all ME EQUIPMENT and ME SYSTEMS IMMUNITY – for ME EQUIPMENT and ME SYSTEMS that are not LIFE-SUPPORTING Guidance and manufacturer’s declaration - electromagnetic immunity Guidance and manufacturer’s declaration - electromagnetic immunity...
Need help?
Do you have a question about the Cor1 and is the answer not in the manual?
Questions and answers