Advertisement
USE AND CARE
Unwind the power cord. Check that the crumb tray is in place and that
there is nothing in the toaster slot. Plug power cord into the wall outlet.
1. Insert Slice(s) of Bread.
Be sure that multiple slices do not overlap and that the carriage is
in the up position.
2. Set the Browning Control.
Turn rotary switch to the desired position:
Setting
1-2
3-4
5-6
Note: Use controls and carriage lever on the left to toast items in slots
1 & 2.
Use controls and carriage lever on the right to toast items in slots
3 & 4.
Note: For optimum results when toasting 2 slices of bread, use one set
of slots only ( 1
st
and 2
nd
OR 3
Some notes on browning:
Toasting is a combination of cooking and drying of the bread.
Therefore, differences in moisture level from one bread to another can
result in varying toasting times.
than normal.
require a higher toast setting.
toast, sometimes significantly longer, since more moisture must be
evaporated from the bread before toasting can occur. Very thick
pieces may require two cycles.
raisins, etc. from the surface of the bread before placing into the
toaster. This will help prevent fruit pieces from falling into the
toaster or sticking on the guide wires in the slot.
3
Colour
light
medium
dark
rd
and 4
th
slot).
Single Slice Toasting:
If you are toasting a single slice of bread, set the heat selector to a
lighter setting than you normally would. The toaster is designed to heat
the whole toasting chamber for two slices. By lowering the heat for a
single slice, you won't overtoast.
Notes on Specialty Uses:
The following breads and pastries should be warmed using the
"Defrost" button:
Frozen Waffles, Pancakes, French Toast and Frozen Bagels
Toaster pastries:
Exercise caution with toaster pastries; the filling can become quite hot,
long before the surface of the pastry becomes browned. Never leave
toaster pastries unattended while toasting or warming.
3.
To Begin Toasting.
Press the carriage lever until it locks into the down position.
4.
To Stop Toasting.
When the toasting cycle is finished, the toast will be raised. If you
wish to stop the cycle before it is finished, simply press the
"Cancel" button.
Tips:
between the guide wires.
the toaster, as this could create a fire hazard.
Defrost Button:
The "Defrost" button is designed to first defrost and then toast the
bread, which extends the cycle slightly.
Advertisement
