Before You Start; Finding A Viewing Video Source Input On Your Tv; Initial Setup - Sanyo FWBP505F K Owner's Manual

5. BEFORE YOU START

5.1. Finding a Viewing Video Source Input on Your TV

After you have completed all of the connections to your TV, review the steps below.
1. Press [ (POWER-ON)] to Turn On the unit.
2. Turn On your TV.
3. Please locate the Source / Input / AUX / Video button on TV's remote control. The button may vary on the
TV brand and model. Once you have located the button, press until you see ˝Please Wait...˝ or ˝Welcome!˝
on the Screen.
This is the correct viewing of the video Source Input.
• If the TV is connected by an HDMI cable, it may take a few moments for the opening picture to appear.
• If a certain amount of time has passed since you Turned On the unit, welcome screen only appears the
fi rst time you Turn On the unit.

5.2. Initial Setup

Please follow the instructions below to complete the initial setup.
1. While welcome screen is displayed, use [
2. Language setup screen will appear. Use [
Please select your language for on-screen
display.
English
Español
Français
Return
EN
Please Wait...
Language
] to select ˝Next˝, then press [OK].
] to select your language, then press [OK].
13
continued on next page