Volkswagen Transporter 2004 Self-Study Programme page 25

Bench seat guide in floor
The 3-seater fully reclining bench seat is also
incorporated in the rail system.
The bench seat is equipped with 8 rollers. It is
moved on 4 rails. 2 rollers run along the cover
strip on each rail.
Adjustment of the seat by means of rollers and
blocks is the same as that on single seats.
Removal and installation of the bench seat is
done in the same way as with single seats at the
front end of the rail system. To do this, only the
rail covers must be removed.
Incorrect installation is prevented here too by
differing seat block sizes.
Roller
Cover strip
Cover cap
Guide rail
310_126
Guide rail
310_125
Cover cap
25