Initial Setup - Samsung Smart TV 6200 User Manual

2. Initial Setup

When you turn on your TV for the first time, it immediately starts the Initial Setup. During Initial Setup, your TV connects to
your home network, implements Smart Hub agreements, links to the source of your live TV signal, and sets up control of your
cable or satellite box.
Information You Need
Have the following information on hand before you turn on
your TV for the first time:
Your wireless network's password. (Make sure your
•
network is on.)
Your Postal or Zip code.
•
The name and location of your cable or satellite
•
provider (if you use one).
Running Initial Setup
1. Point the remote control at the TV.
2. Press the button on the remote control to turn on the TV, and then follow the
directions on the screen.
For more information about using the remote control, see "The Remote Control" on page 7.
To learn more about operating your TV and its Smart Features, launch the TV's built in
e-Manual after you have completed the Initial Setup. For information about the e-Manual,
see "The e-Manual" on page 8.
Using the TV Controller
You can use the TV Controller on the back of the TV instead of the remote control to control most of the functions of your TV.
While watching TV or cable TV, you can change the channel or adjust the volume by pressing the Control Stick. When using
Smart Hub, the TV's menu, or selecting a source, move the Control Stick up, down, left, or right to move the cursor. Press the
Control Stick to select or activate the item highlighted by the cursor.
Using the SOURCE button to switch between video sources
Press the SOURCE button to switch between external devices connected to the TV. For example, to switch to a game
console connected to the second HDMI connector, press the SOURCE button. The Source list appears across the top of the
screen. From the Source list, select HDMI2 .
The connector names may differ with the product chosen.
N
Internet Access
The TV must be connected to the Internet to use the Smart
Features. If you have a wireless network, confirm that your
network router is working before you start the initial setup.
If you have a wired network, connect the TV's LAN port to
the network with an Ethernet cable before you begin (CAT 7
cable preferred).
Control Menu
: Opens Smart Hub .
: Opens the menu.
: Selects a source.
: Turns off the TV.
Control Stick
The Control Stick is located on
the lower left corner of the back
of the TV.
English - 6
w/v: Changes the volume.
</>: Changes the channel.