Kodak pixpro fz201 User Manual page 87

Message
Connection Failed!
Warning! Do not turn off your
camera during update!
Remove USB Cable !
Write Protect !
Card Full !
Memory Full !
86
Description
In the case of failing to connect to a PC or a printer.
The message appears during the firmware update
process.
Indicates that you can disconnect the Micro USB
cable.
When you boot, press the shutter button or edit
the files under playback mode, and the SD card is
locked, the message appear.
When you boot, press the shutter button or edit
the files under playback mode, and the SD card is
locked, the message appear.
When you boot, press the shutter button or edit
the files under playback mode, and the SD card is
locked, the message appear.
Action
Remove transmission line
to stop connection, and the
message is removed.
The message disappears
after the camera update and
restart.
The message disappears after
you disconnect the Micro USB
cable.
The message will disappear
after 2 seconds.
The message will disappear
after 2 seconds.
The message will disappear
after 2 seconds.