Advertisement
Front and Rear Panel Illustration
1. Front Panel
1. Standby Indicator:Used to visually show power state of the set top box, the green
LED will show if turned on the set top box and the red LED will be light if the set top
box entered standby mode.
2. REMOTE CONTROL SENSOR:Used to receive the signal from the remote control.
2. Rear Panel
R F
LOOP
R F
IN
THROUGH
VCR O O
1.RF IN : This socket connects to your external aerial.
2.RF LOOP THROUGH: This socket will by pass the RF signal to either your TV or
another video system.
3.VCR SCART: This socket connects to either a DVD or other video system.
4.TV SCART: This socket connects to your TV.
5.COAXIAL: This socket connects to a coaxial socket on your surround sound system.
6.MAINS CABLE: This is used to connect to your main power supply.
Remote Controller
12
13
14
15
16
17
18
19
20
21
22
100-240V~
50/60Hz
Digital
Audio
15. AUDIO:Used to select the audio language.
Coaxial
16. MENU:Used to open the main menu or return to the previous menu.
TV
17. EPG: Used to display information about the program being viewed and what's on next.
18. VOL-: Used to move around the menu screens or changing the volume in non-menu state.
19. CH- :Used to move around the menu screens or selecting the channels in non-menu state.
20. TEXT: Used to open the interactive digital teletext if available.
21. PAUSE: Used to pause or playback the program being viewed .
22.PAGE-:Used to page down, when there are pages(i.e.channel list).
Note: SUBTITLE/TEXT/AUDIO may not be available for all channels.
1
Remote Key Function:
1. MUTE Used to turn the sound on or off.
2. NUMBER KEYS:Used to select channel numbers or
input numbers in menus.
3.TV/RADIO: Used to switch between TV channels and
Radio stations.
4. INFO Used to display information about the channel
being viewed or further information about the program
3
when in normal play mode.
4
5. SUBTITLE: Used to switch between different subtitles
5
that are broadcasted .
6. EXIT: Used to clean all menus and return to non-menu
state for playing.
7. CH+: Used to move around the menu screens or
selecting the channels in non-menu state.
8. VOL+:Used to move around the menu screens or
changing the volume in non-menu state.
9. OK: Used to confirm a selection within a menu.
10
10. COLOR KEYS(RED/ GREEN/ YELLOW/ BLUE):
Used to operate different functions in teletext.
11. PAGE+:Used to page up, when there are pages
11
(i.e.channel list).
12. DTV/VCR: Used to switch between the VCR SCART
input and the DTV output mode.
13.STANDBY Used to switch the set top box to on or
standby.
14. FAV: Used to switch access your favourite channels.
Advertisement
