Sony DVP-NS400D Service Manual page 77

Cd/dvd player
Hide thumbs Also See for DVP-NS400D:
Table of Contents

Advertisement

QQ
3 7 63 1515 0
7. Video
(7-2) Color Bar
AVD color bar command write → Video OUT
Error: Not detected.
The command is transferred to the AVD, and the color bar
signals are output from video terminals.
They are output from all video terminals (Composite, Y/C,
Component) except EURO AV terminal.
(7-3) Composite Out (AEP, UK Model)
EURO-AV Composite video output check
AVD color bar command write → Video (EURO-AV Com-
posite) OUT
Error: Not detected.
With the Component of video output turned off, the color
bar signals are output from the EURO-AV terminal.
(7-4) Y/C Out (AEP, UK Model)
EURO-AV Y/C video output check
AVD color bar command write → Video (EURO-AV Y/C)
OUT
Error: Not detected.
With the Y/C of video output turned on, the color bar sig-
nals are output from the EURO-AV terminal.
(7-5) RGB Out (AEP, UK Model)
EURO-AV RGB video output check
AVD color bar command write → Video (EURO-AV RGB)
OUT
Error: Not detected.
With the RGB of video output turned on, the color bar sig-
TE
L 13942296513
nals are output from the EURO-AV terminal.
(7-6) Component Out (AEP, UK Model)
EURO-AV Component video output check
AVD color bar command write → Video (EURO-AV Com-
ponent) OUT
Error: Not detected.
With the Component of video output turned on, the color
bar signals are output from the EURO-AV terminal.
(7-7) Euro AV Through (AEP, UK Model)
Euro-AV Through Out ON/OFF check.
AV through out is turned on, check video and audio signal
pass through from Euro-AV2 to Euro-AV1.
Error: Not detected.
8. Audio
(8-2) ARP → 1930
Error 14 : ARP → 1930 video NG
15 : ARP → 1930 audio NG
(8-3) Test Tone
A pink noise signal is output from the AVD (IC503) through
optical coaxial digital terminal and analog audio terminal.
Error: Not detected.
After turning on all outputs, each time the
pressed, the output channel is switched for individual chan-
nel checking.
All channels → 2ch Left → 2ch Right → Front Left →
www
Front Right → Rear Left → Rear Right → Center → Sub
Woofer are checked in this order.
Caution: Sub Woofer is checked only for low-frequency
.
components, and no sound will be heard unless a
proper super woofer is connected.
http://www.xiaoyu163.com
[NEXT]
key is
x
ao
u163
y
i
http://www.xiaoyu163.com
2 9
8
Check Items List
2) Version
(2-2) Revision
(2-3) ROM Check Sum
(2-4) Model Type
(2-5) Region
3) Peripheral
(3-2) Gate Array Check
(3-3) EEPROM Check
4) Servo
(4-2) Servo DSP Check
(4-3) DSP Driver Test
5) Supply
(5-2) ARP Register Check
(5-3) ARP to RAM Data Bus
(5-4) ARP to RAM Address Bus
(5-5) ARP RAM Check
6) AV Decoder
(6-2) 1930 RAM
(6-3) 1930 SP
7)
Video
(7-2) Color Bar
(7-3) Composite Out (AEP, UK Model)
(7-4) Y/C Out (AEP, UK Model)
(7-5) RGB Out (AEP, UK Model)
Q Q
3
6 7
1 3
1 5
(7-6) Component Out (AEP, UK Model)
(7-7) Euro AV Through (AEP, UK Model)
8) Audio
(8-2) ARP → 1930
(8-3) Test Tone
Error Codes List
00: Error not detected
01: RAM write/read data discord
02: Gate array NG
03: EEPROM NG
04: Flash memory clear error
05: Flash memory write error
06: Flash memory read data discord
07: 2725 read data discord
08: ARP register read data discord
09: ARP ←→ RAM data bus error
10: ARP ←→ RAM address bus error
11: ARP RAM read data discord
12: Servo DSP NG
13: 1930 SDRAM NG
14: ARP → 1930 video NG
15: ARP → 1930 audio NG
16: 1910 UCODE download NG
17: System call error (function not supported)
18: System call error (parameter error)
19: System call error (illegal ID number)
co
20: System call error (time out)
21: NAND Flash faulty blocks exceed 10
.
90: Error occurred
91: User verification NG
92: Diagnosis cancelled
6-4
9 4
2 8
0 5
8
2 9
9 4
2 8
m
9 9
9 9

Advertisement

Table of Contents
loading

This manual is also suitable for:

Rmt-d128aRmt-d128p

Table of Contents