Driver Installation - Gigabyte GA-MG400 User Manual

3.1.3. Driver Installation

The following is the step by step installation guide.
Step 1: New Hardware Found
After GA-MG400 is inserted into your computer at the first time, the
windows will automatically detect a new hardware in the system and pop-
out a " New Hardware Found" message. Please select " Do not install a
driver" and press OK.
Step 2: Update Device Driver Wizard: Standard PCI Graphics Adapter
(VGA)
Press the
" Next" button.
Step 3: Update Device Driver Wizard: Finish
Software Installation
Don' t press " Cancel" ,
because the system will
hang if you press it.
Press the
" Finish"
3-5
button