Page 1
OPERATOR’S MANUAL 3/8 in., 19.2 VOLT CORdLESS dRiLL-dRiVER VARiABLE SPEEd/REVERSiBLE Model No. 315.116890 WARNiNG: To reduce the risk of injury, the user must read and understand the operator’s manual before using this product. Customer Help Line: 1-800-932-3188 Sears, Roebuck and Co., 3333 Beverly Rd., Hoffman Estates, IL 60179 USA Visit the Craftsman web page: www.sears.com/craftsman...
BATTERY PACK 315. 259260 Power tools are dangerous in the hands of untrained (140351001) 315.116890 (Ni-Cd) users. 1425301 ( 11041) Maintain power tools. Check for misalignment or 315.115730...
GENERAL SAFETY RULES tained cutting tools with sharp cutting edges are less nails, screws, or other small metal objects that can likely to bind and are easier to control. make a connection from one terminal to another. Shorting the battery terminals together may cause Use the power tool, accessories and tool bits etc., burns or a fire.
SAFETY RULES FOR CHARGER WARNiNG! An extension cord should not be used unless REAd ANd UNdERSTANd ALL absolutely necessary. Use of improper extension cord iNSTRUCTiONS. Failure to follow all instructions could result in a risk of fire and electric shock. If listed below, may result in electric shock, fire extension cord must be used, make sure: and/or serious personal injury.
SYMBOLS Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper inter- pretation of these symbols will allow you to operate the product better and safer. SYMBOL NAME dESiGNATiON/EXPLANATiON Volts Voltage Amperes Current Hertz...
SYMBOLS SERViCE WARNiNG: To avoid serious personal injury, do not Servicing requires extreme care and knowledge attempt to use this product until you read thoroughly and should be performed only by a qualified service and understand completely the operator’s manual. If technician.
FEATURES KNOW YOUR dRiLL-dRiVER KEYLESS CHUCK See Figure 1. The keyless chuck allows you to hand-tighten or release The safe use of this product requires an understanding of the drill bit in the chuck jaws. the information on the tool and in this operator’s manual LEVEL as well as a knowledge of the project you are attempt- ing.
OPERATiON Place the battery pack on a stable surface. Place the WARNiNG: Do not allow familiarity with tools to charger over the battery stem. make you careless. Remember that a careless Press down on the charger to be sure contacts on fraction of a second is sufficient to inflict serious the battery pack engage properly with contacts in the injury.
OPERATiON WARNiNG: Always remove battery pack from your tool when you are assembling parts, making adjust- CHARGING ments, cleaning, or when not in use. Removing bat- INDICATOR tery pack will prevent accidental starting that could cause serious personal injury. Charging EVALUATION INDICATOR TO REMOVE BATTERY PACK...
Page 11
OPERATiON DIRECTION OF ROTATION SELECTOR KEYLESS CHUCK (FORWARD/REVERSE/CENTER LOCK) See Figure 5. The drill has a keyless chuck to tighten or release bits in REVERSE the chuck jaws. The arrows on the chuck indicate which direction to rotate the chuck body in order to LOCK (tighten) or UNLOCK (release) the bit.
OPERATiON REMOViNG BiTS UNLOCK KEYLESS (RELEASE) See Figure 8. CHUCK Lock the switch trigger by placing the direction of rota- tion selector in the center position. DRILL BIT Open the chuck jaws. NOTE: Rotate the chuck body in the direction of the arrow marked UNLOCK to open the chuck jaws.
OPERATiON When drilling through holes, place a block of wood without overheating the bit. Applying too much pres- behind the workpiece to prevent ragged or splintered sure will: edges on the back side of the hole. • Overheat the drill; •...
Page 14
MAiNTENANCE GENERAL MAiNTENANCE WARNiNG: When servicing, use only identical Avoid using solvents when cleaning plastic parts. Most Craftsman replacement parts. Use of any other part plastics are susceptible to damage from various types of may create a hazard or cause product damage. commercial solvents and may be damaged by their use.
CRAFTSMAN 19.2 VOLT dRiLL-dRiVER – MOdEL NUMBER 315.116890 The model number will be found on a plate attached to the motor housing. Always mention the model number in all correspondence regarding your dRiLL-dRiVER or when ordering repair parts. SEE BACK PAGE FOR PARTS ORdERiNG iNSTRUCTiONS...
Get it fixed, at your home or ours! Your Home For expert troubleshooting and home solutions advice: www.managemyhome.com For repair – in your home – of all major brand appliances, lawn and garden equipment, or heating and cooling systems, no matter who made it, no matter who sold it! For the replacement parts, accessories and owner’s manuals that you need to do-it-yourself.
Need help?
Do you have a question about the 315.116890 and is the answer not in the manual?
Questions and answers